# RedBOT reply message route telegram - Track problem

**URL:** https://discourse.nodered.org/t/redbot-reply-message-route-telegram-track-problem/19719
**Category:** General
**Created:** [30 December 2019 01:12 UTC](https://discourse.nodered.org/t/redbot-reply-message-route-telegram-track-problem/19719 "2019-12-30T01:12:48Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![Mobile\_NR\_Env](https://avatars.discourse-cdn.com/v4/letter/m/8dc957/32.png) [@Mobile\_NR\_Env](https://discourse.nodered.org/u/Mobile_NR_Env)
#### Post date: [30 December 2019 01:12 UTC](https://discourse.nodered.org/t/redbot-reply-message-route-telegram-track-problem/19719/1 "2019-12-30T01:12:48Z")

</div>

So I switched from the Telegram messenger (which has a simple switch for a pop up yes or no answer in chat) to using RedBot for more features.

In a flow (from telegram in). Words are filtered. Then a question is asked which is great. But I'd like to integrate a confirmation response of Yes or No (Like the switch in telegram).

So on the telegram **sender node** there is an option:

 ![Screenshot 2019-12-30 at 00.58.03](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/2X/d/d92b5d7e6c9fa9a91d2ac798489236c9552ff1f1.png)

It lies. Because I put a debug node on the output of the sender node. And the message is sent and I reply. Nothing comes back to the output pin.

I'm sure its me being a bit of a noob. But the the Telegram integration was much simpler.

Any help guys?

---

<div class="post-metadata">

### Author: ![Mobile\_NR\_Env](https://avatars.discourse-cdn.com/v4/letter/m/8dc957/32.png) [@Mobile\_NR\_Env](https://discourse.nodered.org/u/Mobile_NR_Env)
#### Post date: [30 December 2019 17:42 UTC](https://discourse.nodered.org/t/redbot-reply-message-route-telegram-track-problem/19719/2 "2019-12-30T17:42:36Z")

</div>

Sorted. WIll edit this and pop the resolve on later 👌