# Rollease blinds Telnet control
**URL:** https://discourse.nodered.org/t/rollease-blinds-telnet-control/29835
**Category:** General
**Created:** [10 July 2020 09:37 UTC](https://discourse.nodered.org/t/rollease-blinds-telnet-control/29835 "2020-07-10T09:37:55Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@nzmikechristiansen](https://discourse.nodered.org/u/nzmikechristiansen)
#### Post date: [10 July 2020 09:37 UTC](https://discourse.nodered.org/t/rollease-blinds-telnet-control/29835/1 "2020-07-10T09:37:55Z")
Does anyone have any form of control working with rollease blinds using the Pulse 2 hub? There are other integrations with automation systems using telnet so it looks possible.
Another open source project hubatat has some code but I dont understand it well enough to move it over to node-red.
> **[\[BETA\] Rollease Acmeda Automate Pulse](https://community.hubitat.com/t/beta-rollease-acmeda-automate-pulse/37094)**
>
> Just finished writing drivers for the Rollease Acmeda Pulse 2 Hub and shades. Currently supports shade control and status report. See the link below for source code and instructions.
Any input or a shove in the right direction would be greatly appreciated.
Thanks all for your time.
Regards, MikeC
---
### Author:  [@Steve-Mcl](https://discourse.nodered.org/u/Steve-Mcl)
#### Post date: [10 July 2020 22:44 UTC](https://discourse.nodered.org/t/rollease-blinds-telnet-control/29835/2 "2020-07-10T22:44:17Z")
Well as telnet is in its basic form ASCII over TCP - absolutely yes.
If you know the IP, port and command string then give it a go.
Start small i.e. inject (enter the string) --\> TCP request --\> debug node.
---
### Author:  [@system](https://discourse.nodered.org/u/system)
#### Post date: [8 September 2020 22:44 UTC](https://discourse.nodered.org/t/rollease-blinds-telnet-control/29835/3 "2020-09-08T22:44:22Z")
This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.