# Share your dashboard

**URL:** <https://discourse.nodered.org/t/share-your-dashboard/100062>\
**Category:** Dashboard\
**Tags:** dashboard-2\
**Created:** [1 January 2026 03:26 UTC](https://discourse.nodered.org/t/share-your-dashboard/100062 "2026-01-01T03:26:44Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![avenger11](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/avenger11/32/104092_2.png) [@avenger11](https://discourse.nodered.org/u/avenger11)\
**Post date:** [1 January 2026 03:26 UTC](https://discourse.nodered.org/t/share-your-dashboard/100062/1 "2026-01-01T03:26:44Z")

</div>

Hi Folks,

After 6 years with Home Assistant and NodeRed (automation), I'm in hate mode with HA dashboard.  
I'm in a quest for a highly reliable system with low/no maintenance. (Build and forget)

So I started discovering flowfuse dashboard (V2) and so far it is solid.  
But I don't see a lot of Home Dashboard made with it.

Is there something wrong with it down the line ? or too much coding for most people ?

So here is my first unfinished version made for a NSPanel Pro 120.

![NSPanel pro](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/0/7/072c9135be980ef81ccfbba019a1e06219734a45.gif)

Cheers,

---

<div class="post-metadata">

**Author:** ![omrid](https://avatars.discourse-cdn.com/v4/letter/o/77aa72/32.png) [@omrid](https://discourse.nodered.org/u/omrid)\
**Post date:** [1 January 2026 12:06 UTC](https://discourse.nodered.org/t/share-your-dashboard/100062/2 "2026-01-01T12:06:42Z")

</div>

Last time I checked, HA includes Node-red dashboard-1 pre-installed, but not dashboard-2 (AKA "Flowfuse dashboard"). As dashboard-1 is now deprecated I would not use it. I have added instructions in the dashboard-2 documentation for how to install it on HA [here](https://dashboard.flowfuse.com/user/home-assistant#running-node-red-with-home-assistant)

---

<div class="post-metadata">

**Author:** ![avenger11](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/avenger11/32/104092_2.png) [@avenger11](https://discourse.nodered.org/u/avenger11)\
**Post date:** [1 January 2026 13:07 UTC](https://discourse.nodered.org/t/share-your-dashboard/100062/3 "2026-01-01T13:07:53Z")

</div>

Thanks Omrid for the information.  
In my case, I don’t pass the dashboard to Home Assistant,  
NSPanel \> Fully Kiosk \> NodeRed Dashboard in full page.

---

<div class="post-metadata">

**Author:** ![TotallyInformation](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/totallyinformation/32/31_2.png) [@TotallyInformation](https://discourse.nodered.org/u/TotallyInformation)\
**Post date:** [1 January 2026 15:23 UTC](https://discourse.nodered.org/t/share-your-dashboard/100062/4 "2026-01-01T15:23:42Z")

</div>

This is _not_ built with FlowFuse Dashboard. 😉

 ![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/a/b/ab2c1fd29aea468c11cdb5ea33229ad0013f9dc1.png)  
 ![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/7/6/76733a761392c80ee05b3891c22e3015fdd69045.png)  
 ![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/b/a/baf93c5338d7ad6e9dc80ceaf95306e79fd62f7b.png)  
 ![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/c/5/c50464b1a8bee9e04450b863d2dc72d8a93ac317.png)  
 ![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/d/1/d1e9a57eb3bf720b9462a7533de66f659829d51d.png)  
 ![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/f/d/fd947a8bbc8be9229086a531bc6e84536f360875.png)  
 ![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/c/8/c88a746fe8182f71e1add93a32da99aba91a1dad.png)

 ![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/9/9/995d7d026df3766326566aa7083d7038fbf2aee9.png)  
This last one is experimental. It aims to be able to show detail when working on a mobile browser that wouldn't normally be visible.

I have others to go in, but they aren't used very often so tend to be at the bottom of my todo list (which, yes, is also on that "dashboard". 😃 )

---

<div class="post-metadata">

**Author:** ![avenger11](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/avenger11/32/104092_2.png) [@avenger11](https://discourse.nodered.org/u/avenger11)\
**Post date:** [1 January 2026 16:32 UTC](https://discourse.nodered.org/t/share-your-dashboard/100062/5 "2026-01-01T16:32:05Z")

</div>

Very nice with UI-builder. 🙂

---

<div class="post-metadata">

**Author:** ![TotallyInformation](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/totallyinformation/32/31_2.png) [@TotallyInformation](https://discourse.nodered.org/u/TotallyInformation)\
**Post date:** [1 January 2026 16:34 UTC](https://discourse.nodered.org/t/share-your-dashboard/100062/6 "2026-01-01T16:34:05Z")

</div>

Thanks. And it doesn't need rebuilding when a front-end framework is replaced.

---

<div class="post-metadata">

**Author:** ![juntiedt](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/juntiedt/32/58357_2.png) [@juntiedt](https://discourse.nodered.org/u/juntiedt)\
**Post date:** [2 January 2026 22:11 UTC](https://discourse.nodered.org/t/share-your-dashboard/100062/7 "2026-01-02T22:11:09Z")

</div>

![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/6/7/67988e928d8382178e4477ec9ec849e76203a139.png)

---

<div class="post-metadata">

**Author:** ![Janvi](https://avatars.discourse-cdn.com/v4/letter/j/a587f6/32.png) [@Janvi](https://discourse.nodered.org/u/Janvi)\
**Post date:** [5 January 2026 06:14 UTC](https://discourse.nodered.org/t/share-your-dashboard/100062/8 "2026-01-05T06:14:25Z")

</div>

the great radar charts are still missing with V2

 ![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/3/9/395d1cb0d7d3b350c0ac171087da75069c545c13.png)

---

<div class="post-metadata">

**Author:** ![Colin](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/colin/32/17040_2.png) [@Colin](https://discourse.nodered.org/u/Colin)\
**Post date:** [5 January 2026 10:21 UTC](https://discourse.nodered.org/t/share-your-dashboard/100062/10 "2026-01-05T10:21:38Z")

</div>

It should not be too difficult to add the radar chart type to the chart node. You could [get involved](https://dashboard.flowfuse.com/contributing/) and contribute it yourself.

---

<div class="post-metadata">

**Author:** ![WP-Rue](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/wp-rue/32/87264_2.png) [@WP-Rue](https://discourse.nodered.org/u/WP-Rue)\
**Post date:** [9 January 2026 12:55 UTC](https://discourse.nodered.org/t/share-your-dashboard/100062/11 "2026-01-09T12:55:49Z")

</div>

Main display on an old android tablet: NR hosted on raspberry 5. middle part has different functions for energy flow, heat pump, garbage remember, radio text

 ![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/3/8/38f150f47a03a3ca4fc821e54afab77cfa287605.jpeg)

* * *

 ![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/6/9/6905728d6db4412eddea207e0ad13b487d978abd.jpeg)

---

<div class="post-metadata">

**Author:** ![TotallyInformation](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/totallyinformation/32/31_2.png) [@TotallyInformation](https://discourse.nodered.org/u/TotallyInformation)\
**Post date:** [9 January 2026 13:07 UTC](https://discourse.nodered.org/t/share-your-dashboard/100062/12 "2026-01-09T13:07:00Z")

</div>

Looks good. Though I hope that your warm water isn't for human consumption and if it is, isn't in a tank. Static warm water below 60 is in danger of developing Legionella bacteria, which can cause Legionnaires’ disease.

---

<div class="post-metadata">

**Author:** ![avenger11](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/avenger11/32/104092_2.png) [@avenger11](https://discourse.nodered.org/u/avenger11)\
**Post date:** [9 January 2026 13:17 UTC](https://discourse.nodered.org/t/share-your-dashboard/100062/13 "2026-01-09T13:17:33Z")

</div>

Nice one !  
What did you use ? Dashboard v1 ? V2 ? Or UI-builder ?

---

<div class="post-metadata">

**Author:** ![WP-Rue](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/wp-rue/32/87264_2.png) [@WP-Rue](https://discourse.nodered.org/u/WP-Rue)\
**Post date:** [9 January 2026 13:41 UTC](https://discourse.nodered.org/t/share-your-dashboard/100062/14 "2026-01-09T13:41:48Z")

</div>

No problem: in the hot water tank is stored not the drinking water but the water from heating: the drinking water is heated during consumption in the tank.

---

<div class="post-metadata">

**Author:** ![WP-Rue](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/wp-rue/32/87264_2.png) [@WP-Rue](https://discourse.nodered.org/u/WP-Rue)\
**Post date:** [9 January 2026 13:43 UTC](https://discourse.nodered.org/t/share-your-dashboard/100062/15 "2026-01-09T13:43:00Z")

</div>

V1. (And some characters here to enable the answer.😉).

---

<div class="post-metadata">

**Author:** ![Sean-McG](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/sean-mcg/32/54677_2.png) [@Sean-McG](https://discourse.nodered.org/u/Sean-McG)\
**Post date:** [9 January 2026 17:03 UTC](https://discourse.nodered.org/t/share-your-dashboard/100062/16 "2026-01-09T17:03:08Z")

</div>

I refer you to my previous post in 😉

> [@Show us your Dashboard!](https://discourse.nodered.org/t/show-us-your-dashboard/47965/15):
>
> I’m quite new to NR and all things IOT, but having fun embracing my inner maker and taking over everything in the house wink This mostly thanks to users and info found on this forum - Designed for a wall mounted tablet Overview - Facial recognition to log in users SVG floorplan with clickable status icons Mobile friendly master controls for all devices Power usage by device etc CCTV viewer interfaced with DVR (also pops up on alarms etc)

Although its a bit out of date, I'm now working on using OpenHASP on LCD touchscreens.

---

<div class="post-metadata">

**Author:** ![Paul-Reed](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/paul-reed/32/66906_2.png) [@Paul-Reed](https://discourse.nodered.org/u/Paul-Reed)\
**Post date:** [9 January 2026 23:19 UTC](https://discourse.nodered.org/t/share-your-dashboard/100062/17 "2026-01-09T23:19:40Z")

</div>

> [@WP-Rue](#):
>
> Main display on an old android tablet

Isn't that Home Assistant??

---

<div class="post-metadata">

**Author:** ![Buckskin](https://avatars.discourse-cdn.com/v4/letter/b/b9e5f3/32.png) [@Buckskin](https://discourse.nodered.org/u/Buckskin)\
**Post date:** [9 January 2026 23:47 UTC](https://discourse.nodered.org/t/share-your-dashboard/100062/18 "2026-01-09T23:47:33Z")

</div>

How do you get Smoke Alarm data from a Summer House (presumably not close to the house). i.e. what smoke alarm & what transmission?

---

<div class="post-metadata">

**Author:** ![TotallyInformation](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/totallyinformation/32/31_2.png) [@TotallyInformation](https://discourse.nodered.org/u/TotallyInformation)\
**Post date:** [10 January 2026 00:50 UTC](https://discourse.nodered.org/t/share-your-dashboard/100062/19 "2026-01-10T00:50:15Z")

</div>

I get smoke alarm data from all my neighbours. 😃 I've recorded hundreds over the years. 433Mhz.

---

<div class="post-metadata">

**Author:** ![Sean-McG](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/sean-mcg/32/54677_2.png) [@Sean-McG](https://discourse.nodered.org/u/Sean-McG)\
**Post date:** [10 January 2026 04:02 UTC](https://discourse.nodered.org/t/share-your-dashboard/100062/20 "2026-01-10T04:02:10Z")

</div>

> [@Buckskin](#):
>
> How do you get Smoke Alarm data from a Summer House (presumably not close to the house). i.e. what smoke alarm & what transmission?

Jeff, at the time of that dashboard it was using the led on the smoke alarm, they flash at a regular interval, hence the Alive status. When in alarm the flash rate increases, the led was wired to a gpio pin on an esp running tasmota, setup as a counter, with a couple of rules to publish Alive or Alarm as needed.

However I have since moved to these X-Sense units -

> **[X-Sense Smart Smoke Alarm for Home with English Voice Alerts and 17 Locations,...](https://www.amazon.co.uk/X-Sense-Locations-Requires-Interlinked-XS0B-MR/dp/B0D66DFPQ9)**
>
> Free delivery and returns on all eligible orders. Shop X-Sense Smart Smoke Alarm for Home with English Voice Alerts and 17 Locations, Wi-Fi Smoke Alarm Requires SBS50 Base Station, Wireless Interlinked Fire Alarm, XS0B-MR, 3-Pack.

They use RF back to the base station, which is Wi-Fi connected, there is an API to check status of its connected devices, which I feed into NR now.

---

<div class="post-metadata">

**Author:** ![TotallyInformation](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/totallyinformation/32/31_2.png) [@TotallyInformation](https://discourse.nodered.org/u/TotallyInformation)\
**Post date:** [10 January 2026 10:44 UTC](https://discourse.nodered.org/t/share-your-dashboard/100062/21 "2026-01-10T10:44:08Z")

</div>

If you already have something like an RFXtrx433 dongle or similar to convert 433MHz to USB Serial, you can use Max's excellent set of nodes to pick up outputs from RM174RF units. I'm still seeing many of them around the neighbourhood. Presumably because there are a lot of rented and student houses around us and those alarms are relatively cheap.

Here is an example output:

```json
{
  "status": {
    "rssi": 4
  },
  "topic": "RM174RF/0x000008",
  "payload": "Smoke",
  "updated": "2025-10-11T07:09:47.590Z",
  "updatedBy": "nrmain/Sensors/RFXtrx433e",
  "input": "rfx-detector",
  "protocol": "RM174RF",
  "id": "0x000008"
}

```

There are currently 2,517 433MHz devices listed in my raw log! I think we only have around 4 working in the house now. The most important one being our front door bell. A quick visual scan of the data suggests that this number has been accumulated since Oct 2020. 😃

Most of the entries are smoke alarms. With some door bells, temperature sensors, and light switches. Even the occasional CM180 power meter.

[Next page](https://discourse.nodered.org/t/share-your-dashboard/100062.md?page=2)