### Author:  [@Lenaschitz](https://discourse.nodered.org/u/Lenaschitz)
#### Post date: [27 December 2024 20:21 UTC](https://discourse.nodered.org/t/shelly-pro-rgb-and-mqtt/94040/9 "2024-12-27T20:21:45Z")
Hi,
I feel like a dork, but it´s still not woking. I imported your example once more had just changed the \ to the real device\_id. I removed the prefix and after areboot ID & prefix are the same.
I changed:
into
Sorry for consuming so much of your time
---
### Author:  [@E1cid](https://discourse.nodered.org/u/E1cid)
#### Post date: [27 December 2024 20:26 UTC](https://discourse.nodered.org/t/shelly-pro-rgb-and-mqtt/94040/10 "2024-12-27T20:26:18Z")
Images are of no help and provide little info, export the flow.
I notice your http request uses RGBW.set, you may need to use this method.
---
### Author:  [@Lenaschitz](https://discourse.nodered.org/u/Lenaschitz)
#### Post date: [27 December 2024 20:34 UTC](https://discourse.nodered.org/t/shelly-pro-rgb-and-mqtt/94040/11 "2024-12-27T20:34:11Z")
Hi,
please find the flow attached:
[flows(1).json](https://discourse.nodered.org/uploads/short-url/5h3y1e5CncmIKJADtGwM3gsp5QN.json) (2.7 KB)
or here:
```auto
[
{
"id": "bc0e2b9ac2648d94",
"type": "tab",
"label": "Flow 3",
"disabled": false,
"info": "",
"env": []
},
{
"id": "0b6ed99e2d913072",
"type": "mqtt in",
"z": "bc0e2b9ac2648d94",
"name": "",
"topic": "shelly_RGBset/rpc",
"qos": "2",
"datatype": "auto-detect",
"broker": "bf3cd836.8e48e8",
"nl": false,
"rap": false,
"inputs": 0,
"x": 170,
"y": 60,
"wires": [
[
"d944826d26d7d71e"
]
]
},
{
"id": "d944826d26d7d71e",
"type": "debug",
"z": "bc0e2b9ac2648d94",
"name": "debug 2",
"active": false,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "payload",
"targetType": "msg",
"statusVal": "",
"statusType": "auto",
"x": 490,
"y": 60,
"wires": []
},
{
"id": "a3da6a5fae1a470a",
"type": "inject",
"z": "bc0e2b9ac2648d94",
"name": "",
"props": [
{
"p": "payload"
},
{
"p": "topic",
"vt": "str"
}
],
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"topic": "",
"payload": "{\"id\":100000,\"src\":\"shelly_RGBset\",\"method\":\"RGB.set\",\"params\":{\"id\":0,\"on\":true,\"brightness\":50,\"rgb\":[255,255,255]}}",
"payloadType": "json",
"x": 130,
"y": 120,
"wires": [
[
"26f0ff2931ca1ba8"
]
]
},
{
"id": "26f0ff2931ca1ba8",
"type": "mqtt out",
"z": "bc0e2b9ac2648d94",
"name": "",
"topic": "shellyplusrgbwpm-30c92257ad08/rpc",
"qos": "2",
"retain": "",
"respTopic": "",
"contentType": "",
"userProps": "",
"correl": "",
"expiry": "",
"broker": "bf3cd836.8e48e8",
"x": 430,
"y": 120,
"wires": []
},
{
"id": "bf3cd836.8e48e8",
"type": "mqtt-broker",
"name": "",
"broker": "192.168.1.30",
"port": "1883",
"clientid": "",
"usetls": false,
"compatmode": false,
"keepalive": "60",
"cleansession": true,
"birthTopic": "",
"birthQos": "0",
"birthPayload": "",
"closeTopic": "",
"closeQos": "0",
"closePayload": "",
"willTopic": "",
"willQos": "0",
"willPayload": ""
}
]
```
---
### Author:  [@E1cid](https://discourse.nodered.org/u/E1cid)
#### Post date: [27 December 2024 20:36 UTC](https://discourse.nodered.org/t/shelly-pro-rgb-and-mqtt/94040/12 "2024-12-27T20:36:47Z")
> [@Lenaschitz](#):
>
> please find the flow attached:
> [flows(1).json](https://discourse.nodered.org/uploads/short-url/5h3y1e5CncmIKJADtGwM3gsp5QN.json) (2.7 KB)
> Regards
Please share code in the preferred method as it makes copying much easier.
In order to make code readable and usable it is necessary to surround your code with three backticks (also known as a left quote or backquote `````)
````auto
```
code goes here
```
````
You can edit and correct your post by clicking the pencil ✏ icon.
See this post for more details - [How to share code or flow json](https://discourse.nodered.org/t/how-to-share-code-or-flow-json/506)
p.s. please read prior post as I added an edit.
---
### Author:  [@Lenaschitz](https://discourse.nodered.org/u/Lenaschitz)
#### Post date: [27 December 2024 20:44 UTC](https://discourse.nodered.org/t/shelly-pro-rgb-and-mqtt/94040/13 "2024-12-27T20:44:46Z")
Sir, done Sir 😉
---
### Author:  [@E1cid](https://discourse.nodered.org/u/E1cid)
#### Post date: [27 December 2024 20:46 UTC](https://discourse.nodered.org/t/shelly-pro-rgb-and-mqtt/94040/14 "2024-12-27T20:46:09Z")
Confused
Are you saying it is working using RGBW.set method, rather than RGB.set method?
or
Are you saying you posted the flow correctly?
---
### Author:  [@Lenaschitz](https://discourse.nodered.org/u/Lenaschitz)
#### Post date: [27 December 2024 20:53 UTC](https://discourse.nodered.org/t/shelly-pro-rgb-and-mqtt/94040/15 "2024-12-27T20:53:02Z")
Hi,
the flow was copy-pasted, so I´m sure there are no misstypings. But in the end I´d like to control RGBW. But honestly I got lost it tons of code, I also got some help from shelly support, but they just sending strings, no idea where and how to send.
I just fogot to adjust QoS and the retain option, before I shared my flow.
Hopefully that helps for fixing my issue.
Regards
---
### Author:  [@E1cid](https://discourse.nodered.org/u/E1cid)
#### Post date: [27 December 2024 20:57 UTC](https://discourse.nodered.org/t/shelly-pro-rgb-and-mqtt/94040/16 "2024-12-27T20:57:08Z")
> [@Lenaschitz](#):
>
> I´m sure there are no misstypings
I am refering to my edit in a previous post, not a typo.
I am saying your http request via browser uses RGBW.set, So the mqtt message should possibly use RGBW.set not RGB.set. Try changing the method in the inject node to RGBW.set.
[edit] just for info
The mqtt node will take the incoming msg.payload message and convert it to a JSON(string) then send that over mqtt.
---
### Author:  [@Lenaschitz](https://discourse.nodered.org/u/Lenaschitz)
#### Post date: [27 December 2024 21:05 UTC](https://discourse.nodered.org/t/shelly-pro-rgb-and-mqtt/94040/17 "2024-12-27T21:05:03Z")
It works 🥳 🎉
Now I have to find out, how I can link my node red dashboard to control the stripe.
Thank you so much for your patience.
Regards
---
### Author:  [@system](https://discourse.nodered.org/u/system)
#### Post date: [10 January 2025 21:05 UTC](https://discourse.nodered.org/t/shelly-pro-rgb-and-mqtt/94040/18 "2025-01-10T21:05:08Z")
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.