To get ALL Smart info about a device:
sudo smartctl --all /dev/sda
Gives:
smartctl 6.6 2017-11-05 r4594 [armv7l-linux-5.10.63-v7l+] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ADATA SU800
Serial Number: 2I4420019349
LU WWN Device Id: 5 707c18 100700a9d
Firmware Version: R0427ANR
User Capacity: 128.035.676.160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Nov 27 16:45:54 2021 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0
5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0
9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 1027
12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 118
148 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 329
149 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 41
150 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 3
151 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 21
159 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
160 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
161 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 33
163 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 24
164 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 11585
165 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 42
166 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 11
167 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 25
168 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 1500
169 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 99
177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 0
181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0
182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0
192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 60
194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 37
195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 0
196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 0
232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100
241 Total_LBAs_Written 0x0000 100 100 000 Old_age Offline - 22798
242 Total_LBAs_Read 0x0000 100 100 000 Old_age Offline - 19695
245 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 104265
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Completed [00% left] (0-65535)
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
