# Solar Assistant MQTT - How to use it with Node Red?

**URL:** <https://discourse.nodered.org/t/solar-assistant-mqtt-how-to-use-it-with-node-red/67281>\
**Category:** General\
**Tags:** mqtt\
**Created:** [3 September 2022 02:31 UTC](https://discourse.nodered.org/t/solar-assistant-mqtt-how-to-use-it-with-node-red/67281 "2022-09-03T02:31:21Z")\
**Posts on this page:** 2\
**Page:** 3

<div class="post-metadata">

**Author:** ![wattmatters](https://avatars.discourse-cdn.com/v4/letter/w/46a35a/32.png) [@wattmatters](https://discourse.nodered.org/u/wattmatters)\
**Post date:** [19 September 2022 01:49 UTC](https://discourse.nodered.org/t/solar-assistant-mqtt-how-to-use-it-with-node-red/67281/41 "2022-09-19T01:49:09Z")

</div>

> [@craigcurtin](#):
>
> What i would suggest we do is cutdown the amount of stuff you are trying to debug to slow down the information stream - change the incmoing MQTT topic to be only the State and Command response channels and see if that helps

Yes, I have debug nodes already to just listen for those. I was going for the full stream with "#" as suggested and thought perhaps there was something else in there to see/catch which might give clues. It doesn't look like it.

Any thoughts on what the "-m" is? I have left that out for now. I've searched but can't seem to get an answer I understand.

One thing I notice is when making commands from Home Assistant sometimes the response is a bit slow.

So far though my HA automations to control the inverter have been working pretty well, so I'm sure NR will too, it just maybe teething problems with a new feature.

Circling back on another matter, the other suggestion was to get a list of what commands I can send to the inverter (via Solar Assistant).

I have a terminal but am unsure how to get that information from the Solar Assistant Pi.

---

<div class="post-metadata">

**Author:** ![wattmatters](https://avatars.discourse-cdn.com/v4/letter/w/46a35a/32.png) [@wattmatters](https://discourse.nodered.org/u/wattmatters)\
**Post date:** [19 September 2022 04:15 UTC](https://discourse.nodered.org/t/solar-assistant-mqtt-how-to-use-it-with-node-red/67281/42 "2022-09-19T04:15:27Z")

</div>

This afternoon I decided to intervene and change to add some supplemental charging from my grid PV system. Some unscheduled cloud has arrived so the off-grid array likely won't quite finish on fully charging the battery.

So I used Node red and the change took after a couple of seconds and was implemented by the inverter. The debug trace:

 ![Screen Shot 2022-09-19 at 2.15.47 pm](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/9/b/9b6cc04a61d35dd4aa9e68d50b802fc3aa2855f0.png)

So it does work. I just want to see that it can work reliably.

[Previous page](https://discourse.nodered.org/t/solar-assistant-mqtt-how-to-use-it-with-node-red/67281.md?page=2)
