Hello i have a Raspberry Pi with Node Red, nothing else till now. i have a second Raspberry Pi with a 433 Dongel and installed like this [image] Native rtl_sdr Setup — sdr-setup-notes documentation to collect and view it on the Monitor works! then installed mosquitto-clients sudo apt install -y mosquitto-clients and done this command rtl_433 -F json -M utc | mosquitto_pub -t home/rtl_433 -l i found out the Port 1883 is closed on the this device. but found no config file and yes sorry basicly it is not a Node Red Proble :wink: but the next step will be the connection have a nice day vinc

@Colin thanks changed the Forum [image] MQTT in Node - sort/switch the input General Hello i have some msg.payload coming from a Raspi-with433MHz Dongel. They nicely drop in Node Red MQTT IN with output a parsed JSON object The Question how do i splitt the Message to use them and later add to InfluxDB? The id: will ich change, or how will it work when two device have the same ID? Do i have to use the Switch node, to splitt the differen input? iot12-rpi3b-gw-433 : msg.payload : Object object time: "2020-12-16 21:31:37" brand: "OS" model: "Oregon-THGR122N" id: 126 chan…

Have you installed mosquitto? That is the package that provides the mosquitto broker, mosquitto-clients gives you the command line client for sub and pub.

@Colin thanks for your feedback. on the Raspi where Node Red is or on the place where the data are? on the 433 Raspi i have only installed a mosquitto client

On whichever device you want to run the broker. Often that will be the device running node red but it is up to you where you run it. I suspect you don't know a lot about mqtt, if so I suggest you read this set of tutorials. [image] MQTT Essentials - All Core Concepts explained

@Colin it is true i have to read more, it also a bit confusing with all the systems working together or sometimes not :wink:

So now it is a Node Red Question from a Raspberr Pi wiht a 433 Dongel i got message like this: iot12-rpi3b-gw-433 : msg.payload : Object object time: "2020-12-16 21:31:37" brand: "OS" model: "Oregon-THGR122N" id: 126 channel: 2 battery_ok: 1 temperature_C: 6.2 humidity: 77 the fist question how offen will a ID change? The Model i have two time but on different Chanel, should a Switch be used to splitt the data? have a nice day vinc

Since this now appears to be a question about the oregon device and the data it provides then it would probably be better to start a new thread with a title describing the problem, then possibly someone who knows that device will be able to help. In the meantime though, as to whether to split the messages down two paths using a switch node that depends on what you want to do. If possible it is better to make one flow that will cope with both channels and use the id to determine what to do, but that depends on what you want to do with the data.

Node-RED

Node-RED Forum

[solved] Mosquitto_pub Node Red

General

vikozo 16 December 2020 22:17 8

@Colin thanks
changed the Forum

Topic		Replies	Views
Can't connect my node-red with mqtt broker (mosquitto) on pi4 General function-node , mqtt	9	304	24 February 2023
Can I ask for a link or process on how to use Node Red and MQTT General	5	417	17 November 2022
Node red fails to connect to mqtt broker General	8	5017	23 May 2021
Can´t connect to Node Red as Client General	17	1159	5 August 2021
Service Change Now nothing works Hardware	14	419	12 June 2023

Copyright OpenJS Foundation and Node-RED contributors. All rights reserved. The OpenJS Foundation has registered trademarks and uses trademarks. For a list of trademarks of the OpenJS Foundation, please see our Trademark Policy and Trademark List. Trademarks and logos not indicated on the list of OpenJS Foundation trademarks are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

[solved] Mosquitto_pub Node Red

Related topics