# Strange behavior dashboard
**URL:** https://discourse.nodered.org/t/strange-behavior-dashboard/71334
**Category:** Dashboard
**Created:** [27 November 2022 19:42 UTC](https://discourse.nodered.org/t/strange-behavior-dashboard/71334 "2022-11-27T19:42:03Z")
**Posts on this page:** 5
**Page:** 1
### Author:  [@Manu77](https://discourse.nodered.org/u/Manu77)
#### Post date: [27 November 2022 19:42 UTC](https://discourse.nodered.org/t/strange-behavior-dashboard/71334/1 "2022-11-27T19:42:03Z")
Strange dashbord behavior that I can't understand,
when I put the clock on the dashbord just gives me the clock.
I'm just playing with the Layout but it doesn't justify the change.
Could it be the formatting????
[flows (1).json](https://discourse.nodered.org/uploads/short-url/lboP6X8LAg9wJUDfWf6x984O7Sq.json) (56.6 KB)
---
### Author:  [@zenofmud](https://discourse.nodered.org/u/zenofmud)
#### Post date: [27 November 2022 21:23 UTC](https://discourse.nodered.org/t/strange-behavior-dashboard/71334/2 "2022-11-27T21:23:10Z")
> [@Manu77](#):
>
> when I put the clock on the dashbord just gives me the clock.
> I'm just playing with the Layout but it doesn't justify the change.
Can you explain this a bit more, it doesn’t make any sense to me. 😕
---
### Author:  [@Manu77](https://discourse.nodered.org/u/Manu77)
#### Post date: [28 November 2022 11:18 UTC](https://discourse.nodered.org/t/strange-behavior-dashboard/71334/3 "2022-11-28T11:18:44Z")
Hello zenofmud
when I try to put the clock (digital and analog clock) does not appear on dashboard.
It could be the dashboard formatting or I updated node red to V3.0.2
Can you open my flow and put the clock and check if it appears on the dashboard??.
Thank you very much.
[flows (1).json](https://discourse.nodered.org/uploads/short-url/lboP6X8LAg9wJUDfWf6x984O7Sq.json) (56.6 KB)
---
### Author:  [@zenofmud](https://discourse.nodered.org/u/zenofmud)
#### Post date: [28 November 2022 11:55 UTC](https://discourse.nodered.org/t/strange-behavior-dashboard/71334/4 "2022-11-28T11:55:29Z")
Try this:
1. Select the inject and two clock nodes and export them to a file.
2. stop node-red
3. start node-red using `node-red clock-test`
4. import the flow you just saved
5. deploy and see what happens
When you have an issue you should provide some basic information
- node-red and node.js version (youcan get these from rthe startup log)
- platform and OS (like Raspberry Pi 4 running Bullseye)
- back up your flow and slim it down to show only the issue (this might help you to figure it out yourself)
---
### Author:  [@system](https://discourse.nodered.org/u/system)
#### Post date: [28 December 2022 11:56 UTC](https://discourse.nodered.org/t/strange-behavior-dashboard/71334/5 "2022-12-28T11:56:01Z")
This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.