# Tempertature automation

**URL:** <https://discourse.nodered.org/t/tempertature-automation/9829>\
**Category:** General\
**Created:** [6 April 2019 09:25 UTC](https://discourse.nodered.org/t/tempertature-automation/9829 "2019-04-06T09:25:03Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![ihebabidi](https://avatars.discourse-cdn.com/v4/letter/i/e47c2d/32.png) [@ihebabidi](https://discourse.nodered.org/u/ihebabidi)\
**Post date:** [6 April 2019 09:25 UTC](https://discourse.nodered.org/t/tempertature-automation/9829/1 "2019-04-06T09:25:03Z")

</div>

hello all !  
im using the ACKP sensor to mesure the temperature, wich is plugged in a sensorprobe2.  
the device sensorprobe2 has a default web interface wich allows me to see the value of the temperature, but i want to get data from that default interface to the dashboard of node red.  
how can i do it ?  
will mqtt protocol works?  
thank you.

---

<div class="post-metadata">

**Author:** ![ukmoose](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/ukmoose/32/13_2.png) [@ukmoose](https://discourse.nodered.org/u/ukmoose)\
**Post date:** [6 April 2019 09:34 UTC](https://discourse.nodered.org/t/tempertature-automation/9829/2 "2019-04-06T09:34:04Z")

</div>

There are many ways of getting data into Node-RED which includes MQTT, http, serial.  
But it really depends on what your "sensorprobe2" software can output.

There are many example flows on [flows.nodered.org](http://flows.nodered.org) that might give you some ideas.

---

<div class="post-metadata">

**Author:** ![ihebabidi](https://avatars.discourse-cdn.com/v4/letter/i/e47c2d/32.png) [@ihebabidi](https://discourse.nodered.org/u/ihebabidi)\
**Post date:** [6 April 2019 09:49 UTC](https://discourse.nodered.org/t/tempertature-automation/9829/3 "2019-04-06T09:49:10Z")

</div>

how can i know the kind o the output of my software?

---

<div class="post-metadata">

**Author:** ![krambriw](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/krambriw/32/5429_2.png) [@krambriw](https://discourse.nodered.org/u/krambriw)\
**Post date:** [6 April 2019 10:07 UTC](https://discourse.nodered.org/t/tempertature-automation/9829/4 "2019-04-06T10:07:49Z")

</div>

Ask the supplier

---

<div class="post-metadata">

**Author:** ![ghayne](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/ghayne/32/39_2.png) [@ghayne](https://discourse.nodered.org/u/ghayne)\
**Post date:** [6 April 2019 10:12 UTC](https://discourse.nodered.org/t/tempertature-automation/9829/5 "2019-04-06T10:12:21Z")

</div>

As far as I can see it uses SNMP for getting and setting parameters.

There is an SNMP node:

> **[node-red-node-snmp](https://flows.nodered.org/node/node-red-node-snmp)**
>
> A Node-RED node that looks for SNMP oids.

---

<div class="post-metadata">

**Author:** ![ihebabidi](https://avatars.discourse-cdn.com/v4/letter/i/e47c2d/32.png) [@ihebabidi](https://discourse.nodered.org/u/ihebabidi)\
**Post date:** [7 April 2019 12:26 UTC](https://discourse.nodered.org/t/tempertature-automation/9829/6 "2019-04-07T12:26:55Z")

</div>

thank you very much, it worked.