# TP Link HS100 Feedback

**URL:** https://discourse.nodered.org/t/tp-link-hs100-feedback/18484
**Category:** General
**Created:** [26 November 2019 23:28 UTC](https://discourse.nodered.org/t/tp-link-hs100-feedback/18484 "2019-11-26T23:28:39Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![MikeDrisc](https://avatars.discourse-cdn.com/v4/letter/m/53a042/32.png) [@MikeDrisc](https://discourse.nodered.org/u/MikeDrisc)
#### Post date: [26 November 2019 23:28 UTC](https://discourse.nodered.org/t/tp-link-hs100-feedback/18484/1 "2019-11-26T23:28:39Z")

</div>

Hi All,

Similar to this thread, I have two HS100 plugs working fine and I have an on and off button on a crestron panel to control them, I would however like the button to be "up to date" with feedback from the device. I found this thread:

> [@TP - Link HS110 status](https://discourse.nodered.org/t/tp-link-hs110-status/6591):
>
> Hi Guys, hopefully i'm at the right place here in the forum. I have a problem with the TP Link Smart plug node. I can switch the plug on and off. That works. But, how can i get the status from the plug and convert it to 0=off and 1=on?

But I do not fully understand what I need to do to get the device to feedback info to my crestron processor. Here is a copy of my flow

 ![12](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/2X/e/e5cb34eb1688eb5622cc0eb3af2225e75da41ebf.png)

Any help would be greatly appreciated