Hello, I am installing Node-RED on my third Rpi 3 and ran into the following. I am pasting the CLI output as well and a portion of the error logs. The error log indicates some 404 errors is the site experiencing some issues. I did not have this issue yesterday? I used this command for all of m…

There is something odd going on with your system. First try and bring your system up to date using sudo apt update && sudo apt full-upgrade If that fails then post the output here.

Sorry Colin my last full upgrade on a pi 400 resulted with this when I ran the Node_red update CLI output(The last little bits at the end of the CLI output was me attempting to run the suggested command. I may have to quit now to have my draft. Dave Running Node-RED install for user pi at /ho…

I Finally got the CLI input correct syntax correct. There are so many languages to have some grasp of today Thanks for all of the help. I am now on the downside of the idiot curve I hope. Dave Here is my CLI output for reference after the Bash adjustment was made. This can take 20-30 minutes o…

Is there any reason why you are using Raspberry Pi OS Buster rather than the latest release Bullseye? Did you deliberately install an old version of Node-Red? I suspect you were misled by the message " You can update to the latest Node-RED 1.x version by adding --nodered-version="1.3.5" to that…

Hello you will have to give me a hint as to where to specify --node16. I tried to add it on to the end of the install statement. That did not work. On a side note have you ever heard of issues with Rpi 4's and 400s not playing with i2c BUS? I am tearing my hair out trying to get this figured ou…

After the closing bracket. bash <(curl -sL https://raw.githubusercontent.com/node-red/linux-installers/master/deb/update-nodejs-and-nodered) --node16 I'm not sure if this will upgrade Node-Red from 1.3.5 to 2.1.4. If it's a new Raspberry Pi setup it might be worth reburning the OS. No idea about…

I am confused by ask your earlier posts. Does sudo apt update && sudo apt full-upgrade work? If not then you need to sort that first. @jbudd is right though, if this is a new setup then you should use Bullseye.

[image] Colin: if this is a new setup then you should use Bullseye The situation became a lot muddier yesterday as Rpi have introduced a "legacy" Buster. [image] "New" old functionality with Raspberry Pi OS (Legacy) - Raspberry Pi We are releasing a 'legacy' version of the Raspbe…

[image] cymplecy: until the Bullseye one becomes stable. Is it not stable?

Unable to Install Node_RED Missing node.js, and NPM stops installation Buster 10

General

Loonhaunt 2 December 2021 23:01 3

Colin,
I forgot

sudo apt update && sudo apt full-upgrade

on this machine. I have been working on this project since about this time yesterday with about three hours sleep. Time for a brew here in Colorado USA.

Thanks so much for waking me up.

Dave

Topic		Replies	Views
Unable to install node-red - on raspian buster 2020-02-13 General	20	4661	20 March 2020
Installation of Node-Red fails // RPi Desktop (buster) General	16	2247	5 August 2021
NodeRED couldn´t install - Nodejs Bad install: Node.js missing General	18	618	6 March 2024
Install erroring out GLIBCXX_3.4.26 not found General node-red-install	33	1041	21 April 2025
Install Node-Red General	82	883	14 September 2024

Unable to Install Node_RED Missing node.js, and NPM stops installation Buster 10

Related topics