# Wall mounted Node-RED touch screen device: Request for ideas and volunteers

**URL:** <https://discourse.nodered.org/t/wall-mounted-node-red-touch-screen-device-request-for-ideas-and-volunteers/51136>\
**Category:** Hardware\
**Created:** [17 September 2021 07:04 UTC](https://discourse.nodered.org/t/wall-mounted-node-red-touch-screen-device-request-for-ideas-and-volunteers/51136 "2021-09-17T07:04:28Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![Christian-Me](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/christian-me/32/10774_2.png) [@Christian-Me](https://discourse.nodered.org/u/Christian-Me)\
**Post date:** [18 September 2021 08:08 UTC](https://discourse.nodered.org/t/wall-mounted-node-red-touch-screen-device-request-for-ideas-and-volunteers/51136/12 "2021-09-18T08:08:38Z")

</div>

Hi,  
such a project is in my backlog for years now, but only materialized in some hardware (TFT and eInk screens in various shapes and capabilities) on my workbench and a lot of research  
.  
even if your criteria 13 is a no go for a micro controller platforms my plan is to start a esp32 / c++ project. I think the ESP32 (depending on the model) is capable of the task (400k+ RAM, 2-8MB PSRAM, WLAN (and LAN option), fast SPI and even parallel LCD interfaces up to 16bit). The STM32s with there huge range of models could fit in here to and I have an STM32F746 DISCO board in my collection

With the ESP32-WROVER modules there is a solid CPU base and I was waiting for a single board solution with an min 3.2" capacitive touch screen and a small form factor I was sure someone in China will produce (and some enthusiasts on tindie notorious out of stock) sooner or later

And here they are in 2021:

On my desk (4.7" epaper 540x960 pixels, 16 gray levels (no color ☹ strange touch option but some nicely placed buttons), battery options. Nice for a wireless on the desk mobile information display  
 ![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/f/5/f54be44879f4d49aa9183eb874acf7dff64da427.png)  
On order: WT01-SC01 (3.5" tft 480x320, capacitive touch) 40 € Currently my favorite as it clicks a lot of checkmarks  
 ![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/3/a/3a2e8b0a4d0c6ccefa32032e5d69df9efabc9927.png)  
on my wish list: WT-86-32-3ZW1 (320x320 tft nice case) 60€ (perhaps a goto solution a soon the foftware is ready)  
 ![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/3/7/3762ec07caa8d918e8efb1389cf89d0ee244419d.jpeg)  
and as a development platform a all in one dev board from espressif **ESP32-S2-HMI-DevKit-1** ( 4.3-inch display with **800×480** resolution, I2C capacitive touch panel 16bit inferface!) 70€ (if I need a bigger screen)

 ![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/2/f/2faccc60009deabef0823444cf6e116085fd4b36.jpeg)

So plenty of nice all in one hardware solutions now form 30-100€.

On the software side I'm following [https://lvgl.io/](https://lvgl.io/) for a while now and beside the challenging setup I think it is a solid open source platform for a mcu dashboard. From the inferface side I plan to use MQTT / Homie as a base but create the network inferface plugable with websockets as an option.  
BTW The modules form wireless-tag provides a LVGL based point and click development platform ( 8ms GUI Development Platform) but as may of these kinds of software I have my problems, this is why I don't like the nextion modules (mine is collecting dust somewhere)

Now I only have to find some time to give this a start (anyone interested in a collaboration feel welcome to contact me 😉

Enough for a morning post 🙂

@BartButenaers : Only a little tip. Don't use the BME280! It is so inaccurate (designed as a incredible accurate pressure sensor but not environment sensor) It appears (after research) that it looses the factory calibration if the reflow limits are not met precisely resulting in a temperature offset of up to 3°C! (the adafruit lib has a calibration function but my last research showed that it does not effect humidity accuracy which depends on precise temperature values). I use a BME680 (great IAQ sensor and human/animal presence sensor!) or my favorite TI-HDC2080 designed for the task.

Another one for tablet users: I use the open source android app ([GitHub - thanksmister/wallpanel-android: WallPanel is an Android application for Web Based Dashboards and Home Automation Platforms](https://github.com/thanksmister/wallpanel-android))

---

_[View the full topic](https://discourse.nodered.org/t/wall-mounted-node-red-touch-screen-device-request-for-ideas-and-volunteers/51136)._
