# Webhook in issue

**URL:** <https://discourse.nodered.org/t/webhook-in-issue/87329>\
**Category:** General\
**Tags:** http-in\
**Created:** [19 April 2024 08:02 UTC](https://discourse.nodered.org/t/webhook-in-issue/87329 "2024-04-19T08:02:31Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![zmelkoow](https://avatars.discourse-cdn.com/v4/letter/z/ecb155/32.png) [@zmelkoow](https://discourse.nodered.org/u/zmelkoow)\
**Post date:** [19 April 2024 08:02 UTC](https://discourse.nodered.org/t/webhook-in-issue/87329/1 "2024-04-19T08:02:31Z")

</div>

Hello!

I am trying to ger some webhooks into NodeRed but I am having an issue at the complete start;  
I can get the webhook onto webhook.site without a problem.  
When I try to get it in NodeRed I get an error "Error: missing nodes property" three times; according to the documentation this is because the sender didn't get the connection to server. (it tries to send it 3 times).

I tried with function and switch node to send message 200 back but with no success...

Here is what documentation says:

The block expects the receiver to respond to each POST message with a [200 (OK)](https://tools.ietf.org/html/rfc7231#section-6.3.1) HTTP status code. If a TCP connection couldn't be established while sending the output, the block will attempt to do it again up to 2 times immediately after the failure. If a TCP connection has been established, but the receiver didn't respond properly, the block will resend the message every 10 seconds up to 2 times. Then the message is discarded.

Edit; I tried to connect to the server with curl from Poweshell but I also can't connect...

---

<div class="post-metadata">

**Author:** ![bakman2](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/bakman2/32/6207_2.png) [@bakman2](https://discourse.nodered.org/u/bakman2)\
**Post date:** [19 April 2024 08:58 UTC](https://discourse.nodered.org/t/webhook-in-issue/87329/2 "2024-04-19T08:58:51Z")

</div>

The http-in node serves get/post requests, a webhook may be more specific in its communication.

Can you post an example flow what you are trying to do ? use the:  
 ![image](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/1/e/1ebac4461719be210f656393142a7943651a2b04.png)

and post your code there.

---

<div class="post-metadata">

**Author:** ![zmelkoow](https://avatars.discourse-cdn.com/v4/letter/z/ecb155/32.png) [@zmelkoow](https://discourse.nodered.org/u/zmelkoow)\
**Post date:** [19 April 2024 09:04 UTC](https://discourse.nodered.org/t/webhook-in-issue/87329/3 "2024-04-19T09:04:00Z")

</div>

Hi!  
I just found owt; it was a stupid mistake...  
I was publishing to http//ip.addr/flow  
and it looks that Nodered is already handling this path somehow and it doesn't allow connecting...

---

<div class="post-metadata">

**Author:** ![TotallyInformation](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/totallyinformation/32/31_2.png) [@TotallyInformation](https://discourse.nodered.org/u/TotallyInformation)\
**Post date:** [19 April 2024 11:59 UTC](https://discourse.nodered.org/t/webhook-in-issue/87329/4 "2024-04-19T11:59:07Z")

</div>

One of the admin routes. Set `httpNodeRoot` in settings.js if you want to avoid clashes. Or change the admin root alternatively.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)\
**Post date:** [18 July 2024 11:59 UTC](https://discourse.nodered.org/t/webhook-in-issue/87329/5 "2024-07-18T11:59:22Z")

</div>

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.