# Zigbee (Nodes node-red-contrib-zigbee) and SmartThings Sirene

**URL:** <https://discourse.nodered.org/t/zigbee-nodes-node-red-contrib-zigbee-and-smartthings-sirene/28123>\
**Category:** General\
**Created:** [10 June 2020 14:55 UTC](https://discourse.nodered.org/t/zigbee-nodes-node-red-contrib-zigbee-and-smartthings-sirene/28123 "2020-06-10T14:55:23Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![get-command](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/get-command/32/25038_2.png) [@get-command](https://discourse.nodered.org/u/get-command)\
**Post date:** [10 June 2020 14:55 UTC](https://discourse.nodered.org/t/zigbee-nodes-node-red-contrib-zigbee-and-smartthings-sirene/28123/1 "2020-06-10T14:55:23Z")

</div>

Hi community,

i need your help again 🙂

I have successfully paired the device ([https://www.zigbee2mqtt.io/devices/SZ-SRN12N.html](https://www.zigbee2mqtt.io/devices/SZ-SRN12N.html)), but how can I now use it with the motion detector? Example: motion detector sends motion or other inject/ trigger node activate the alarm. which node can i use for this?

 ![grafik](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/b/6/b640b874b38dc5e9a86c2bc66c9070e2be90ec8c.png)

Thank you for help.

---

<div class="post-metadata">

**Author:** ![get-command](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/get-command/32/25038_2.png) [@get-command](https://discourse.nodered.org/u/get-command)\
**Post date:** [10 June 2020 15:58 UTC](https://discourse.nodered.org/t/zigbee-nodes-node-red-contrib-zigbee-and-smartthings-sirene/28123/2 "2020-06-10T15:58:02Z")

</div>

easier: how can I start the siren/alarm (the event)? The event has only output, but not input which i can connect with a inject or trigger node.

---

<div class="post-metadata">

**Author:** ![get-command](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/get-command/32/25038_2.png) [@get-command](https://discourse.nodered.org/u/get-command)\
**Post date:** [11 June 2020 10:30 UTC](https://discourse.nodered.org/t/zigbee-nodes-node-red-contrib-zigbee-and-smartthings-sirene/28123/3 "2020-06-11T10:30:04Z")

</div>

I did another research on the internet. maybe someone can give me a tip? 😀 😀 👍

these are the attributes of the siren. I do not know which is for the alarm start or end and how I write this into the node (converter):

 ![grafik](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/e/d/edb780460379bb89e031bc73bb2a4972d755264e.png)

What write here to start the siren:

 ![grafik](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/6/1/6124db6acbc4e3de9c3705d28f0756b320c569d9.png)

I'm very, very grateful for every tip 😀 😃 😄

---

<div class="post-metadata">

**Author:** ![get-command](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/get-command/32/25038_2.png) [@get-command](https://discourse.nodered.org/u/get-command)\
**Post date:** [12 June 2020 09:01 UTC](https://discourse.nodered.org/t/zigbee-nodes-node-red-contrib-zigbee-and-smartthings-sirene/28123/4 "2020-06-12T09:01:17Z")

</div>

I Think, i have the solution. The Commands find in the Command-Node. I can select the Attributs and skills, when i select the device. A Screenshot attached later.

But i have now a other Problem. The device permit join only short time. I Think, this is a specific problem with the devices, not from node red or the node pallets. Other diveces (e.g. aqara) function very good.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)\
**Post date:** [11 August 2020 09:01 UTC](https://discourse.nodered.org/t/zigbee-nodes-node-red-contrib-zigbee-and-smartthings-sirene/28123/5 "2020-08-11T09:01:20Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.