# Zigbee SONOFF SNZB-02

**URL:** <https://discourse.nodered.org/t/zigbee-sonoff-snzb-02/52909>\
**Category:** General\
**Created:** [28 October 2021 19:34 UTC](https://discourse.nodered.org/t/zigbee-sonoff-snzb-02/52909 "2021-10-28T19:34:00Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Georde](https://avatars.discourse-cdn.com/v4/letter/g/51bf81/32.png) [@Georde](https://discourse.nodered.org/u/Georde)\
**Post date:** [28 October 2021 19:34 UTC](https://discourse.nodered.org/t/zigbee-sonoff-snzb-02/52909/1 "2021-10-28T19:34:00Z")

</div>

Hello. Please help me, I'm new to Node-Red.  
I want to read the temperature and humidity in the Sonoff SNZB-02 sensor ...  
I managed to connect to it with --- node-red-contrib-tuya-local --- picture attached ....  
 ![zigbee senzor](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/f/3/f3d5a87fec153b57c366bb906b98507bc4effa7e.jpeg)  
From here I don't know how to make the two read ... temperature and humidity and display them in the dashboard...  
I searched the internet but I didn't find anything ..  
Please help.  
Thank you

---

<div class="post-metadata">

**Author:** ![Buckskin](https://avatars.discourse-cdn.com/v4/letter/b/b9e5f3/32.png) [@Buckskin](https://discourse.nodered.org/u/Buckskin)\
**Post date:** [28 October 2021 20:50 UTC](https://discourse.nodered.org/t/zigbee-sonoff-snzb-02/52909/2 "2021-10-28T20:50:26Z")

</div>

> [@Georde](#):
>
> Sonoff SNZB-02

I use the `node-red-contrib-tuya-smart-device` node for Tuya units & zigbee2mqtt for all my zigbee units so I can't give you authorative advice, but the first thing you could do is add a debug node to your `node-red-contrib-tuya-local` node and see what is coming out of it. If the Sonoff is anything like my Aqara zigbee sensors you may have to wait before you get a response as they tend to only transmit when something changes.

---

<div class="post-metadata">

**Author:** ![Georde](https://avatars.discourse-cdn.com/v4/letter/g/51bf81/32.png) [@Georde](https://discourse.nodered.org/u/Georde)\
**Post date:** [28 October 2021 21:13 UTC](https://discourse.nodered.org/t/zigbee-sonoff-snzb-02/52909/3 "2021-10-28T21:13:42Z")

</div>

Please show me who is with you, he can go to me too.  
Thanks

---

<div class="post-metadata">

**Author:** ![Colin](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/colin/32/17040_2.png) [@Colin](https://discourse.nodered.org/u/Colin)\
**Post date:** [29 October 2021 08:12 UTC](https://discourse.nodered.org/t/zigbee-sonoff-snzb-02/52909/4 "2021-10-29T08:12:29Z")

</div>

I am afraid that post must have lost meaning in the translation as it does not really mean anything.  
Did you add a debug node to see what is coming from the Tuya node as @Buckskin suggested?

---

<div class="post-metadata">

**Author:** ![Georde](https://avatars.discourse-cdn.com/v4/letter/g/51bf81/32.png) [@Georde](https://discourse.nodered.org/u/Georde)\
**Post date:** [29 October 2021 20:19 UTC](https://discourse.nodered.org/t/zigbee-sonoff-snzb-02/52909/6 "2021-10-29T20:19:31Z")

</div>

I don't know how to read the data from the sensor ..... I don't know .... I'm a beginner ...beginner in node- red  
I don't know how to read with zigbee2mqtt.  
I can't find anything to start with ... to figure out how to do it ...  
Thank you for your help .... I give up looking ....

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)\
**Post date:** [28 November 2021 20:20 UTC](https://discourse.nodered.org/t/zigbee-sonoff-snzb-02/52909/7 "2021-11-28T20:20:02Z")

</div>

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.