# Zigbee switch not working

**URL:** <https://discourse.nodered.org/t/zigbee-switch-not-working/52601>\
**Category:** Hardware\
**Created:** [23 October 2021 07:35 UTC](https://discourse.nodered.org/t/zigbee-switch-not-working/52601 "2021-10-23T07:35:31Z")\
**Posts on this page:** 6\
**Page:** 2

<div class="post-metadata">

**Author:** ![cflurin](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/cflurin/32/29_2.png) [@cflurin](https://discourse.nodered.org/u/cflurin)\
**Post date:** [24 October 2021 06:31 UTC](https://discourse.nodered.org/t/zigbee-switch-not-working/52601/21 "2021-10-24T06:31:06Z")

</div>

> [@myhobby2](#):
>
> I'm still looking for a way to "find" the user-friendly name that I can use in Node-red, but that is a new question

Take a look at the doc:

Tasmota \> commands \> Zigbee

---

<div class="post-metadata">

**Author:** ![myhobby2](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/myhobby2/32/49836_2.png) [@myhobby2](https://discourse.nodered.org/u/myhobby2)\
**Post date:** [24 October 2021 06:36 UTC](https://discourse.nodered.org/t/zigbee-switch-not-working/52601/22 "2021-10-24T06:36:37Z")

</div>

Just found it before reading you post. I'm not sure if I would have gotten this far without your help. There are a lot of variables in the complete end-to-end process before it starts working. Really appreciated your help !

---

<div class="post-metadata">

**Author:** ![cflurin](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/cflurin/32/29_2.png) [@cflurin](https://discourse.nodered.org/u/cflurin)\
**Post date:** [24 October 2021 06:36 UTC](https://discourse.nodered.org/t/zigbee-switch-not-working/52601/23 "2021-10-24T06:36:46Z")

</div>

Example with friendly-names:

 ![zigbeeBridge2](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/3X/e/c/ecc602a88e6a3e7c5f82db9fe55e9807c2ca87a0.png)

---

<div class="post-metadata">

**Author:** ![myhobby2](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/myhobby2/32/49836_2.png) [@myhobby2](https://discourse.nodered.org/u/myhobby2)\
**Post date:** [24 October 2021 06:38 UTC](https://discourse.nodered.org/t/zigbee-switch-not-working/52601/24 "2021-10-24T06:38:23Z")

</div>

That is what, I assume, everybody wants, isn't it 😉

---

<div class="post-metadata">

**Author:** ![myhobby2](https://sea2.discourse-cdn.com/flex026/user_avatar/discourse.nodered.org/myhobby2/32/49836_2.png) [@myhobby2](https://discourse.nodered.org/u/myhobby2)\
**Post date:** [25 October 2021 18:02 UTC](https://discourse.nodered.org/t/zigbee-switch-not-working/52601/25 "2021-10-25T18:02:13Z")

</div>

After a successfull setup of the zigbee bridge I see that my sensors are not being logged in home-assistant in this mode. Lets see how to deal with that. This topic is resolved for me.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/nodered/original/1X/d073cd938eafa2e558d7c2cd59003b3ef4963033.png) [@system](https://discourse.nodered.org/u/system)\
**Post date:** [24 December 2021 18:03 UTC](https://discourse.nodered.org/t/zigbee-switch-not-working/52601/26 "2021-12-24T18:03:04Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.

[Previous page](https://discourse.nodered.org/t/zigbee-switch-not-working/52601.md?page=1)