Hi, The Netatmo "Get Measurements" node reads the days minimum termperature from my Netatmo outdoor module and when I fill in msg.payload.devices[0].modules[2].dashboard_data.min_temp in the debugger the correct measurement (degrees minimum temperature value like 15.3) is shown in the debug frame…

You can use a change node to setup the message for influx.

Thanks Colin, just tried the Change node but no succes. Not even after reading the node help, can you be more specific how to use it in my flow?

Post what you see in a debug node before the change node and another after and show us the change node config. Tell us what you want to see on the output.

Also check that you have configured the influxdb node with the correct details of your database.

When this: payload.devices[0].modules[2].dashboard_data.min_temp is in my debug node then output in the debugger shows the correct min-temp: 15-7-2019 11:50:04 node: 42184b89.07c674 msg.payload.devices[0].modules[2].dashboard_data.min_temp : number 15 So I think I need a function or change to sav…

I am using an influxdb-batch node (with telegraf) and send all netatmo data to it like this: m = msg.payload.devices[0].dashboard_data msg.payload = [ { measurement:"netatmo", fields: m, tags:{ weather:"internal" }, timestamp: new Date() …

Thanks Bakman2, works like a charm and the data is saved in the DB. Now struggling how to save only the min_temp from the outdoor module, any help would be appreciated.

But if you have it in the database, it is already saved no ?

The indoor module data is saved, not the outdoor module data. I think msg.payload.devices[0].dashboard_data refers to the indoor module. [influx]

Sorry, you can use: m = msg.payload.devices[0].modules[0].dashboard_data and for min-temp only: m = msg.payload.devices[0].modules[0].dashboard_data.min_temp

Node-RED

Node-RED Forum

Function to write Netatmo measurement in Influx DB

General

HaVi 15 July 2019 14:18 14

Solved, thanks for helping!

Topic		Replies	Views
Store data in InfluxDB show in Chronograf General database	33	1072	27 July 2022
TTN Payload to InluxDB General	30	2957	13 June 2019
Input data to Influxdb General database	34	2962	9 November 2021
Writing HTTP request values to InfluxDB General	28	2951	18 May 2019
Data entry into influxdb General database	21	2533	10 December 2021

Copyright OpenJS Foundation and Node-RED contributors. All rights reserved. The OpenJS Foundation has registered trademarks and uses trademarks. For a list of trademarks of the OpenJS Foundation, please see our Trademark Policy and Trademark List. Trademarks and logos not indicated on the list of OpenJS Foundation trademarks are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

Function to write Netatmo measurement in Influx DB

Related topics