I haven't had a chance to look at this in any detail but it sounds good. https://about.gbridge.io/ gBridge is an application, that provides a Bridge between Google Assistant smart home devices and MQTT, an open and available messaging protocol that is supported by many smart home applications and…

Lots of ways, but here is one using a ternary operator ... Try the below code into a function node. let result = msg.payload.params.on? "on" : "off" return { payload: result } [{"id":"88c190a4645879b4","type":"inject","z":"217df193.d774ce","name":"True","props":[{"p":"payload"},{"p":"topic","vt":"…

I've been trying this out for a few days and it has worked well. With all the trouble it can be to set up google integration it was nice to have it up and running in literally about 10 minutes.

Is there something like this for Alexa??

Yes, same here. The MQTT response is really fast, and consistent.

Ah, very cool. While I'm always cautious about using 3rd-party services connected to the house, at least there is a nice easy way to get started before setting up a home server. I did check out the Ts&Cs and the privacy page. The former seem OK, the privacy page is rather lacking as it only refers …

I noticed a few days ago, that some new features have been added, see this post . Two of the features in particular caught my attention; Acknowledgement Hey Google, turn on {device name} Are you sure you want to turn on {device name}? Yes. OK, turning on {device name} and Acknowledgement Hey G…

Hi there :slight_smile: I'm really bad in code and need some help. When I use the bridge I gott a long message from it sent to my Mqtt. See below. I want to use an IF in a function node to have a response on the state "true" / "false" and send on / off instead to the mqtt. Please help. { topi…

Thank you so much :slight_smile: works perfect and I have learned new things! Thank you for fast and nice response! Have a nice day. sincerely Ola A in Sweden.

Node-RED

Node-RED Forum

Gbridge - a Google Smart Home to MQTT bridge

General

Paul-Reed 6 February 2020 10:11 7

Link - gBridge service closing

Topic		Replies	Views
Alexa , google and mqtt Share Your Projects node-red-dashboard , telegram , function-node , ui-widgets , mqtt	0	610	4 February 2022
Querying data from a sensor via Google Home? General	3	674	11 February 2019
Google Home integration General	25	9140	21 April 2020
Triggering of Mqtt using google assistant General	5	952	7 November 2020
Node-red-contrib-googlehome General	4	505	13 February 2022

Copyright OpenJS Foundation and Node-RED contributors. All rights reserved. The OpenJS Foundation has registered trademarks and uses trademarks. For a list of trademarks of the OpenJS Foundation, please see our Trademark Policy and Trademark List. Trademarks and logos not indicated on the list of OpenJS Foundation trademarks are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

Gbridge - a Google Smart Home to MQTT bridge

Related topics