Hi Everyone, Hoping to get some direction here. I am trying to create a flow where I ping google every 10 mins, if ping is false, wait another 10 mins, ping again and if false, run ssh command to reboot the router (it an asus router that allows ssh). However, I am struggling with catching the outpu…

This is the solution I ended up with using inject, exec, delay, switch, and bigssh nodes. The 2nd ping is just to double check if the first ping was by error. [image] [ { "id": "343e08a1.fc3668", "type": "tab", "label": "Reboot Router", "disabled": false, …

The exit code for success (in the exec node) is 0, anything else is not good. But I am not sure what your flow is doing. You have a ping node, switch, delay and an exec node that pings again (?) Try this flow: [{"id":"d0e65ce4.139f68","type":"inject","z":"c7a7f9b9.d798d8","name":"","topic":"","pa…

Thank you @bakman2 for the flow. Is is odd that when I tried to catch the non-zero on the exec node, it didn't work for me. I will try your code. If someone can please assist with the SSH node, that will be great! Thanks!

I haven't used the SSH node, when I want to execute a remote command via ssh I use a normal Exec node with a command something like ssh user@ip_address 'reboot'. If the reboot command needs to be sudo reboot then the device being rebooted needs to be configured to not need a password for that comma…

I guess so, but you would be better to setup ssh keys, if possible, so you can access without having to include the password in plain text anywhere.

Ok, found that it is possible to use the bigssh node to run the command. I will post the resulting flow in a bit.

You can simplify it somewhat using a Trigger node instead of the delay. Feed the Fail output from the ping into a trigger node set to send nothing then send the fail message after two minutes. Feed the Success output of the ping into a Change node that sets msg.reset and also feed that into the tr…

Node-RED

Node-RED Forum

Home Assistant - Router Reboot with Ping, EXEC and SSH

General

war1000 16 January 2020 15:49 5

thanks @Colin! so for me because i have a password, would it be ssh user:password@ip_address 'reboot'

Topic		Replies	Views
First project - Internet status dashboard / router reboot Share Your Projects	3	429	25 May 2022
How do I start with the correct flow from SSH? General	17	3562	5 April 2019
Remote reboot device from node red General	5	827	31 July 2021
Flow consolidation help General	6	412	10 February 2021
My effort at remote shutdown for ras-pi's Share Your Projects	1	807	9 December 2019

Copyright OpenJS Foundation and Node-RED contributors. All rights reserved. The OpenJS Foundation has registered trademarks and uses trademarks. For a list of trademarks of the OpenJS Foundation, please see our Trademark Policy and Trademark List. Trademarks and logos not indicated on the list of OpenJS Foundation trademarks are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

Home Assistant - Router Reboot with Ping, EXEC and SSH

Related topics