Rebuilding my Home Automation RPi3B+ with latest version of RPi, NodeRed and MQTT. I had exported the FLOW from the old system. After installing the new software versions and trying to import the FLOW I realized there is a little more to it than that. I had to install several nodes from the library…

DynamicDave is the winner. It wasn't the little blue dots he was concerned about, it was the lack of green in the button at the right end of the debug node. When I clicked in there everything came to life. I just couldn't get that idea out of my head so I investigated that node and that was it. …

Apologize for my confusion. Thank you for the link.

I am getting ready to rebuild again but here are answers to the latest questions. I can ping the new RPi from the old RPi. The 2nd port of the router goes to a 2.5G switch which goes to a 12port 1G switch and then all over the house. The two pi devices are plugged into that switch. The link to the…

As I asked please post the flow inline, I get access denied on the link you posted, but that is not the preferred way to post flows. In order to make code readable and usable it is necessary to surround your code with three backticks (also known as a left quote or backquote ```) ``` code goes …

[image] merkelck: The two pi devices are plugged into [a 12port 1G] switch. I strayed away from the real issue a bit by wondering about network topology, but it's good to know both Pies are connected the same. Barring confusion between devices, we do see attempts to connect to Mosquitto, so …

Sorry but the machine had already been shutdown. For "jbudd" , I have run those tests before several times as they are part of the course where this came from. They are run twice, for each method, with or without credentials and they both passed each time. And this also involved the change in the "a…

[image] merkelck: And, Yes, your home network is identical to mine Umm Your network is identical to @dynamicdave 's with the possibly insignificant difference that your Pies are connected by ethernet and he shows his as wifi. [image] merkelck: At this point my procedures are exact duplica…

[image] jbudd: When you posted the contents of your mosquitto.conf, the first few lines were in large font. That is because the forum has interpreted it as markdown, so lines starting with # are interpreted as headers. I have edited the file to add triple backticks around the text.

[image] jbudd: Umm Your network is identical to @dynamicdave 's with the possibly insignificant difference that your Pies are connected by ethernet and he shows his as wifi. Actually my set-up has the Pi connected by Ethernet CAT cable and the SonOff switch by WiFi. [sunday_mqtt_C] Not comp…

Here is the latest report. Sunday afternoon CDT I rebuilt the system in accordance with "jbudd" procedure posted above (105) including the four line "mosquitto.conf" file and the two line "my.conf" file located in the conf.d directory. I logged into the new system on my pc and opened the nodered. T…

Need help rebuilding home automation raspberry pi

General

ab9nq 29 March 2026 18:35 124

Concerning the switch; has the Mosquitto broker: user name and password been set to match on the switch?

What about the rest of the switch's configuration?

Reference: Setting up the Tasmota MQTT Switch (Sonoff)

Topic		Replies	Views
MQTT No Longer Works General	38	704	22 July 2024
Oh great! Now my MQTT is not working! General	32	7127	8 February 2019
Raspberry pi help setting up a second MQTT broker General	42	2468	16 December 2020
MQTT-In Not Connecting General	69	9061	7 November 2019
Failed to connect zum Broker localhost General	15	614	19 July 2022

Need help rebuilding home automation raspberry pi

Related topics