hello, a problem with a function: :face_with_raised_eyebrow: the goal: when the virtual switch "A" in lovelace is "true" and the motion detector is "true" I have the plug on "on" in other cases on "off" * But nothing comes out of the function? :sob: can you help me? I attach my flow file [Capt…

it's not very pretty but it works well. [capture_alarme_ok] [{"id":"bf54e42bbb243fab","type":"tab","label":"Flow alarme test","disabled":false,"info":"","env":[]},{"id":"f02add9212c79299","type":"inject","z":"bf54e42bbb243fab","name":"","props":[{"p":"payload"}],"repeat":"","crontab":"","once":fa…

You are comparing apples with oranges. "on" is not equal to true

thank you jbudd I changed the "true" to "on" and it works. but it does not give a command to the socket? I think I should use a "change" but I don't see how. [Capture403] :roll_eyes:

Why not just set msg.payload to true or false instead on 'on' or 'off'

What mqtt topic does the socket listen for? What payload causes it to switch on or off? My smart socket is flashed with Tasmota and the topic is defined as (for example) "bedroom/light" To turn them on I set topic to "cmnd/bedroom/light" and payload to "on" That's Tasmota, if yours have differen…

like this? [Capture500] it does not change anything the socket does not change state

it's an IKEA socket that works with my zigbee2mqtt usb key Exposes # Switch The current state of this switch is in the published state under the state property (value is ON or OFF ). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "ON"} , {"stat…

I tried that but it doesn't work either. an idea ? [Capture600]

Node-RED

Node-RED Forum

Node-red and logical functions

General

pilou8830 14 February 2022 18:54 6

like this?

it does not change anything the socket does not change state

Topic		Replies	Views
Looking for a relay switch function General	35	10839	24 November 2018
Enable a flow help General	14	323	4 April 2021
Dual condition switch? General function-node	8	670	9 February 2022
Setting a switch value dependent on multiple other switches General	22	987	26 June 2022
Telegram + 9x gpio-multi-function-lights + P.I.R + dash all working ;) but need help with a function General	5	1267	27 February 2019

Copyright OpenJS Foundation and Node-RED contributors. All rights reserved. The OpenJS Foundation has registered trademarks and uses trademarks. For a list of trademarks of the OpenJS Foundation, please see our Trademark Policy and Trademark List. Trademarks and logos not indicated on the list of OpenJS Foundation trademarks are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

Node-red and logical functions

Related topics