Hi everyone, due to the coronavirus, I have to work at home for my project, which is adapted from my co-worker. One part of the project is interfacing as: Raspberry Pi 3 <-> RS485 Converter <-> speed controllers -> fans We use the RS485 Converter as: [image] On my Pi, I'm using Nodered (Nodejs v…

What do you have in the 'optionals' tab?

link a Modbus response node to the bottom output and set quantity to less than 100 (it is requesting 100 registers)

The datasheet of your controller shows that the status word is at 1001H (hex), so in the modbus node, that would be 4097 decimal. It also shows the status being 5 words in length. I do not know what the data formatting is, if they're using ieee 754 floating point data words, integers divided by some…

optional tab just to show errors and activities. I think for debugging

it does not work, show me the same error. Should i write some command into the register before reading?

Hey Bond, this could likely be a simple issue, but we need the device manual (the full manual) to be able to help out. What did you change the modbus read node to now?

Hi @gemini86 , I only changed the quantity to 10 from my previous post. This is the full manual: Manual Cheers

how did you work out the quantity to be 3?

From the manual you linked. Can't cite the PDF right now, I'm on mobile. Any luck?

Node-RED

Node-RED Forum

Raspberry PI connect to RS485

General

gemini86 21 April 2020 18:46 31

Try reading (function 3) word address 3000, quantity 3.

Topic		Replies	Views
PLC Weidmuller UC20-WL2000-IoT connecting via RS-485 Industrial	15	493	9 May 2023
USB RS485 - RPI4B Connection issue General	3	237	26 July 2023
Debugging - node-red-contrib-modbus - serial RTU General	26	5552	15 February 2021
Modbus RS485 to USB communication Industrial	50	8677	29 May 2020
Modbus RTU using ch340 ttl to usb on pi 4 General modbus	26	718	4 August 2023

Copyright OpenJS Foundation and Node-RED contributors. All rights reserved. The OpenJS Foundation has registered trademarks and uses trademarks. For a list of trademarks of the OpenJS Foundation, please see our Trademark Policy and Trademark List. Trademarks and logos not indicated on the list of OpenJS Foundation trademarks are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

Raspberry PI connect to RS485

Related topics