Hello Everyone, I am new to node-red and learning about it using internet. I have found various information about siemens PLC - node red communication by using S7 comm & modbus TCP nodes but Is it possible to use tcp in/ tcp out/tcp request nodes for Siemens PLC communication? I am using TSEND_C …

[ { "id": "859a3b1.9af2bc8", "type": "tcp request", "z": "543af69d.409c98", "server": "localhost", "port": "1880", "out": "immed", "splitc": " ", "name": "", "x": 490, "y": 140, "wires": [ [ …

Hello, the port that you are listening on in node-red should be the same as the port you configured in the PLC connection. You look to have set this to 1880 where as it should be what you have set up in the plc (from pic this is 2000)

I have a question, why don´t you simply use the s7 node , as you mentioned above?

Node-RED

Node-RED Forum

Siemens PLC communication using TCP IP node

Industrial

knolleary 15 May 2020 16:55 2

@RAW I have deleted the other topic you started. Please repost the flow here following the guide here: How to share code or flow json

Topic		Replies	Views
Siemens 1200 plc to node red (TCP) Industrial	8	930	11 January 2023
Problem of the connection at node red (node-red-contrib-s7) with S-1200 PLC Siemens Industrial	2	133	10 November 2025
Modbus tcp of Siemens s7-12000 Industrial modbus	2	835	6 April 2022
Using Node-RED and (Step7) PLCSIM Industrial	4	4149	29 January 2021
The node-red and PLC communication General	10	2503	1 June 2021

Copyright OpenJS Foundation and Node-RED contributors. All rights reserved. The OpenJS Foundation has registered trademarks and uses trademarks. For a list of trademarks of the OpenJS Foundation, please see our Trademark Policy and Trademark List. Trademarks and logos not indicated on the list of OpenJS Foundation trademarks are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

Siemens PLC communication using TCP IP node

Related topics