Hi! Im creating a Dashboard to show diferent values extracted from an equipment. I can read the just 5 modbus adress, but when I try to get 6 or more readings lost all the connections. How can I fix it?

Your best bet is to read those ranges 1 at a time by connecting the modbus nodes in series instead of parallel.

Hi unfortunately nowhere near enough info I'm afraid. What device is it? What address are you accessing? Can you link to a manual that lists the registers? Lastly, can you clarify this ... [image] nago93: but when I try to get 6 or more readings lost all the connections ... What exactly ha…

Hi! Im Agree, I going to try to be clearest: Device: Battery Energy Storage System- Address: I can read any address, but just 5 as maximum, If I try to read 6 address so it disconnect some nodes. In the first image Just reading 5 address (from 12295 to 12299) and all ok: [5 address] In the sec…

I read 60 registers with no issue but use only one node. why do you have so many nodes ? can you not put address 12295 and put 10 quantity ? [image] can you show the setting of the node like above ?

[image] nago93: In the first image Just reading 5 address (from 12295 to 12299) and all ok: [5 address] This is the least efficient and most problematic way of gathering data I'm afraid. This document has some good advice and practical info directly related to your requirement: Modernize yo…

Thanks, I Feel this is the best option. But Im concerning about use just one node in my scenarios , let me show you how the registers address are distributed: [image] In this case, is ok read in one node from 257 until 24643 address? it mean 24386 registers, I feel it is a lot, but Im not sure if …

Thanks! I read it, it is too helpful to understand more about the modbus efficiency!

[image] nago93: is ok read in one node from 257 until 24643 address? it mean 24386 registers, I feel it is a lot No, the maximum read count is 125 registers in one request.

Got it. So, it is a limitation for my case? is any way to get all the data? or should I look for something different to node-red?

The limitation is the modbus specification, not node-red. Other software will have exactly the same limitations. The are some exceptions like certain PLC's but typically, 125 is the protocol limitation

Node-RED

Node-RED Forum

I cant read more than 5 modbus Holding register

General

nago93 27 July 2024 21:53 12

Thanks, do you mean something similar like this?? How to create an Modbus-TCP alarm status dashboard - #20 by Steve-Mcl

Topic		Replies	Views
Modbus address limit General	3	437	14 June 2021
Modbus massive reading General modbus	12	858	18 August 2023
Help required with Modbus Node General database , modbus , function-node	1	247	28 May 2023
read 2 spaces with node-red-contrib-modbustcp General	5	324	1 April 2023
Modbus extended addressing General	2	906	23 March 2019

Copyright OpenJS Foundation and Node-RED contributors. All rights reserved. The OpenJS Foundation has registered trademarks and uses trademarks. For a list of trademarks of the OpenJS Foundation, please see our Trademark Policy and Trademark List. Trademarks and logos not indicated on the list of OpenJS Foundation trademarks are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

I cant read more than 5 modbus Holding register

Related topics