marantz avr SR5015. I am able to ping the device on my PC after setting up network. But marantz http-out node reads node inactive. Please Help. [marantz]

@manishsuperhome Welcome to the forum! Unfortunately, the node you are using ( node-red-contrib-marantz-http ) hasn't been updated by it's author in over 6 years. This indicates that it has probably been abandoned and you will have to find another solution for what you want to do. I make it a habit …

A few thoughts - Your screen shot looks like the flow needs to be deployed. Did you configure the node with the ip of your unit ? Have you tried injecting the example payload shown in the docs ? Does the status on the node change when you click the inject node ? Does it work via the web page - …

Marantz/Denon receivers can be controlled via TCP quite easily. If you search google for 'marantz control protocol' you will find this spreadsheet . In the command columns you will find what you can send and what it returns. Example flow - change the IP address of the receiver in the TCP node [{"…

Yes, node is configured with the IP of my unit. Yes, I injected the example payload shown in the docs. No, the status does not change when I click the inject node. Yes, the web page is working.

I used this flow, and changed the IP to my device, and injected the node, but there are no changes

Did you match the commands as specified in the spreadsheet (you may want to search for your specific device as the spreadsheet does mention a receiver - SR5014 - not sure if they are compatible or that something changed) - and this requires a LAN cable, not wireless.

You mean, the device marantz should be connected to a LAN Cable?

Yes correct. If you tried this wirelessly, yes the node will fail, connect a LAN cable and the node you used will most likely work as well (as it probably implements the protocol as described in the spreadsheet)

I connected using LAN, but it didn't work.

Node-RED

Node-RED Forum

Marantz http-out node reads node inactive

General

manishsuperhome 10 May 2023 06:57 12

If you have a bit of free time, can you see what's wrong with my configuration? I can share my anydesk with you.

Topic		Replies	Views
Http control of a Marantz Amplifier General	6	739	25 April 2021
Reset status HTTP node General http-request	3	442	22 March 2023
Node to connect to Mariner (3D printer control software for RPi) Developing Nodes	6	923	26 May 2021
Tcp request node, host/port via flow works only once General	20	6713	3 February 2019
Http in node - timeout? Share Your Projects	7	993	23 April 2021

Copyright OpenJS Foundation and Node-RED contributors. All rights reserved. The OpenJS Foundation has registered trademarks and uses trademarks. For a list of trademarks of the OpenJS Foundation, please see our Trademark Policy and Trademark List. Trademarks and logos not indicated on the list of OpenJS Foundation trademarks are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

Marantz http-out node reads node inactive

Related topics