Hi there, I have been tired to resolve an issue for the last couple of days but unfortunately, it seems is over my knowledge so here I am here writing hoping that someone would help me. I have two DS18B20 sensors connected to WeMos module running tasmota firmware. the flow i have is: [image] An…

You want to Move the data in the change node, and as the influxdb node requires it to be in msg.payload, you need to put it there... [{"id":"1840b612.f851ba","type":"inject","z":"edaf3fb5.1907c","name":"","topic":"tele/Wemos/SENSOR","payload":"{\"Time\":\"2019-07-16T07:16:50\",\"DS18B20-1\":{\"Id\"…

Take a look at the Info panel for the influxdb node If msg.payload is an object containing multiple properties, the fields will be written to the measurement. For example, the following flow injects three fields, numValue , randomValue and strValue into the same measurement with the curren…

Side note: you can configure the mqtt node to output json, no need for the json node.

For the last hours I have tried to work it out but since I am back here you know what the answer is.......didn't succeed. I have set up an inject node to simulate json data and tried different options, unfortunately, would not happen today. so here is my test flow I someone could take a look I would…

I can't thank you enough ukmoose. Thanks, everything is working now. [image] And I'll try to learn from here on how to place the two sensors DS18B20-1 and DS18B20-2 under the temp something like that [image] Thanks once again!!!!

For those who run into this. Another way to deal with the problem could be with jsonata expression: [image] [image] still learning, NR is fun :slight_smile:

Node-RED

Node-RED Forum

Multiple DS18B20 temperature sensor (Tasmota->NodeRed->InfluxDB))

General

ukmoose 16 July 2019 12:26 5

Unfortunately your flow isn't currently importable.Please read the following post How to share code or flow json and then edit the above message.

Topic		Replies	Views
Inporting data into InfluxDB database General database	19	286	7 May 2023
Send JSON data to influxdb from Node-red General	15	1048	1 March 2023
DS18B20 to InfluxDB and CSV General	3	483	29 May 2021
esp32-Tasmota-nodered-influx General	15	370	2 December 2023
Combine Sensor data to transfer in Influxdb Dashboard	5	1124	24 November 2020

Copyright OpenJS Foundation and Node-RED contributors. All rights reserved. The OpenJS Foundation has registered trademarks and uses trademarks. For a list of trademarks of the OpenJS Foundation, please see our Trademark Policy and Trademark List. Trademarks and logos not indicated on the list of OpenJS Foundation trademarks are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

Multiple DS18B20 temperature sensor (Tasmota->NodeRed->InfluxDB))

Related topics