Hello, I'm trying to show several locations in the worldmap. When i restarted the node red and the Rasspberrypi and deployed the below there is nothing in the worldmap. It is hard to discover the issue in my flow mentioned below. Im not sure what is the mistake or what has happened here. I'm kindl…

Ok- I have fixed the timing issue in version v1.5.20 of worldmap now on npm.

Hello dceejay, the info it needs is just the initial lon and lat information to lock the map above my location. but no points whatsoever. one example i saw it used the ttn_uplink a function which i dunno what code i should use inside ( i used the one proposed by my device vendor ( https://raw.githubu…

To quote the info... The minimum `msg.payload` must contain `name` , `lat` and `lon` properties, e.g. {"name":"Joe", "lat":51, "lon":-1.05} `name` must be a unique identifier.

The reply you send me goes to the function node or world map, i cant see where i edit the above code [131db4b00cf473b311ad8c6544417b54d3f0f143]

I suggested using a change node - but as you already have a function node then in there may well be easiest. I would move hardware_serial to name and latitude to lat etc.

Im sure i didnt got you explanation right, what node should i edit? I dont see any hardware_serial and so on..

That came from your original message.... so I assumed you had that in your function node... [image]

[image] dceejay: {"name":"Joe", "lat":51, "lon":-1.05} Thanks for the reply, i have a small succesful update that the map is working, i used your suggestion and used instead a change node with an inject button on the back and then to the map. Used the following object as a JSON in change {"na…

So you have msg.payload object like { altitude: "159.9m" barometer: "989.7hPa" battery: "3.79V" gasResistance: "11.83KΩ" humidity: "57%RH" latitude: "41.1612°" longitude: "24.1387°" temperature: "22.3°C" } so you need to ffed this to a change node that is set to move [ms…

[Untitled] did something like that, but im sure i didnt understood it

Look at what I typed. Move not set

No output in the worldmap

Dashboard

panban-ux 10 May 2020 18:32 37

@dceejay Yes that purpose was only for you see the payload example in the debug window, thanks though!
It worked as i altered the decode function in TTN and edited the fuction script within the function.

Topic		Replies	Views
World Map don't maintain the Marker when restart the page Dashboard node-red-dashboard , windows	14	308	1 April 2023
Gps dashboard for live location General	65	5702	28 October 2020
How to update the iconColor of the worldmap location with a Switch? Dashboard	3	872	6 February 2019
Worldmap problem Dashboard node-red-dashboard	20	347	29 July 2024
Not seeing coordinates on worldmap General	28	1588	1 December 2020

No output in the worldmap

Related topics