Hi. I am making a smart home prototype where I connected the door with Servo-motor and I wanna rotate the motor on one fix position (95°) then it can open my door. Now I switch from the dashboard and connect it with GPIO out (PWM) with frequency 100 Hz and it is rotating 180°. I think I need to add …

Please read this link and edit your previous post so that we can import the flow. Also tell us what about it does not work. [image] How to share code or flow json FAQs To share code samples or flow json in this forum, you need to take care to format it properly so that it…

And what does not work? Your flow only has the the nodes to inject one value (1).

Actually, I mounted Servo motor with smart home door and wanna to open and close the door with servo movement.

So if you put different values in inject nodes are you able to make it move the right points?

Different values in inject node means. Yes, I know I can add 0 to 9 as mention payload number.

So what inject values give you the two positions from the servo that you need?

Actually, in my case, I wanna open and close the servo motor mounted door with RFID ( which is already connected and working fine). And I wanna node as shown in picture.[error]

So we need to know two things. The answer to my previous question, which you haven't answered, do you know what values you need to send to the servo node? Assuming you do know (or have now worked it out) what are they Put a debug node showing the output of the RFID node and show us what it shows f…

You posted a flow with an inject node and said that when you change the injected number it moves the servo. So all you have to do is to find what numbers you need to inject to get the position you want. Or you could connect it to a slider so you can more easily try a range of numbers.

Sure, But I wanna use RFID node as a input node instead of slider or inject node.

Node-RED

Node-RED Forum

Servo Motor with fixed angle

General

usmanEmder 25 March 2020 15:26 20

Well, I am not sure what values I need to assign and where I need to assign for Servo. But physically, I need 0 to 95°.

Topic		Replies	Views
Servo motor gpiod guide General	27	886	31 July 2023
Servo's on Node-Red General	8	6430	29 March 2019
Help with twitter node and servo General	9	524	19 August 2019
Control a servo ...HELP General	11	426	7 September 2022
Turn servo 90 degrees during sun rise and sun set General	2	196	17 June 2022

Copyright OpenJS Foundation and Node-RED contributors. All rights reserved. The OpenJS Foundation has registered trademarks and uses trademarks. For a list of trademarks of the OpenJS Foundation, please see our Trademark Policy and Trademark List. Trademarks and logos not indicated on the list of OpenJS Foundation trademarks are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

Servo Motor with fixed angle

Related topics