Hello Guys! I just started to use Raspberry OS Full with applications. First when I installed it, noticed, that it has built in Node-RED (so cool). I tried it without any modification and I manage to control GPIO pin 2 without any issue through Node-RED. Then I did an upgrade according to this arti…

[image] tiby007: I setup PIGPIOD to start automatically after reboot with this command: sudo systemctl enable pigpiod maybe this service that you are starting uses the PINS and doesnt allow the Node-red RPi Node to access them ? what if you stop that service and restart NR server ?

[image] tiby007: I setup PIGPIOD You don't need pigpiod for node-red-node-pi-gpio. That is for node-red-node-pi-gpiod. See Interacting with Raspberry Pi GPIO : Node-RED I don't know what the effect of running pigpiod is when trying to use the pi-gpio node.

This is not about creating custom nodes - moved to general

Hello! I need to have run this service to be able to control the robot from my python program. Anyway, I just tried to stop the pigpiod to check if that is the case, then restarted Node-RED several times, but the results was the same: not available.

Hi Colin! When I tried this on the brand new Rasberry OS, it worked. I could start the robot sequence from a button connected to the GPIO and also from Node-RED. At that time PIGPIOD was running behind. So I think that is not the problem. Something else should be. Any other idea?

[image] tiby007: The newest Rasberry OS is installed on it. Which version is that? [Edit] Also what do these commands show apt-cache policy rpi.gpio groups

pi@zeus:~ $ cat /etc/os-release PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=raspbian ID_LIKE=debian HOME_URL=" http://www.raspbian.org/ " SUPPORT_URL=" RaspbianForums - Raspbian " BUG_REPORT_URL=…

That all looks ok. This thread has another user unable to access the GPIO with raspbian bullseye (which has only just been released)

I don't think it will help, but for the record, what does uname -a show?

pi@zeus:~ $ uname -a Linux zeus 5.10.63-v7l+ #1459 SMP Wed Oct 6 16:41:57 BST 2021 armv7l GNU/Linux

Node-RED

Node-RED Forum

GPIO not available on Raspberry

General

Colin 11 November 2021 20:54 16

For anyone finding this it looks like we have a fix in the the other thread.

Topic		Replies	Views
Rpi-gpio : Raspberry Pi specific node set inactive General	77	3605	17 November 2021
Node-red in Linux os unable to control Raspberry pi 4B GPIO General gpio	14	326	24 March 2024
GPIO not available via NODE-RED General	5	1111	2 April 2021
"nrgpio python command not running" error General	24	922	21 December 2023
Node-red running on DietPi shows gpio nodes as not available General	6	944	24 September 2021

Copyright OpenJS Foundation and Node-RED contributors. All rights reserved. The OpenJS Foundation has registered trademarks and uses trademarks. For a list of trademarks of the OpenJS Foundation, please see our Trademark Policy and Trademark List. Trademarks and logos not indicated on the list of OpenJS Foundation trademarks are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

GPIO not available on Raspberry

Related topics