I recently asked about buttons/LEDs not updating their colours until the page is refreshed. I updated the offending machine's dashboard and all was good. Recently I got interested with colours to use with buttons/LEDs and the name you can use. I made a dashboard with only LEDs on it to get the na…

so are you saying this is no longer a problem?

I am saying that that time when I went to the page - after a long up time - and looked at the page it wasn't "loaded". Subsequent tries have not really proven it one way or another. All tests have been done on this boot session. Without a full reboot - which just now is not possible as I am updat…

[image] Trying_to_learn: Yes, there is an inject node which (after 5 seconds) injects true which goes to the LED which is set to turn (colour) when true is received. The 'LED` is grey at the start and it should turn (colour) after 5 seconds. Looking at the montage of pictures I originally post…

An inject node firing will depend on the deploy level you have set and if you have the Inject once after __ seconds, then enabled If you have deploy set to: Full - thenall inject nodes Inject once after __ seconds, then enabled with will fire Modified Flows - an inject node with Inject once aft…

Yeah, ok. Good point. I know I have my deploy "dialed back" but when testing this, I make sure the inject node is also modified. I have just powered up another RPI that has an older version of NR. It worked. But..... Thinking about what you said. Fair enough about the different modes for de…

At this stage, no. I shall have to keep this in mind. I am now trying to get my main RPI (NR) machine back online after an update.

Knock knock. Got some more observations for you. I got the NR working on the other machine today so that is now behind me. Back to this problem. I booted this machine. (Ubuntu NUC with power to spare) Loaded browser and the page with the LEDs was in/on a tab. After a bit of pfaffing around, …

Here is a couple of screen grabs showing what is happening. Pic 1: You see that on deploy the inject node injects a signal to invoke the true to the LEDs. That is also sent to the queue node for later looking. Pic 2: This is the WiFi scanner. You can see that two messages sneaked through befor…

Have you looked at the LED's using a different browser than Firefox?

Node-RED

Node-RED Forum

LED's not showing colours with latest dashboard

Dashboard

zenofmud 17 June 2019 13:46 16

have you tried a different browser?

Topic		Replies	Views
ui_LED, dashboard and error 401 Dashboard	43	2315	6 February 2019
ui_LED problem not showing on dashboard Dashboard	26	3884	14 December 2021
ui_LED not always working Dashboard	13	1670	26 April 2019
Trouble with Led on Dashboard General	22	1693	3 December 2020
Button colours - stuck Dashboard	32	2931	28 May 2019

Copyright OpenJS Foundation and Node-RED contributors. All rights reserved. The OpenJS Foundation has registered trademarks and uses trademarks. For a list of trademarks of the OpenJS Foundation, please see our Trademark Policy and Trademark List. Trademarks and logos not indicated on the list of OpenJS Foundation trademarks are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

LED's not showing colours with latest dashboard

Related topics