Having seen a notification on twitter and a post on another thread from @razorRun I've tried getting this to work with my tuya rgb light bulb I can get the smartlife app to control my bulb and I've registered myself on the smartlife website but the bulb doesn't show up in the node config [image] …

Ah ha! Found the issue, Since you are based in EU it's using our EU db and this node is looking at US DB. I will apply a patch for this later. But for the time bean can you create a new account in mobile app and choose the country as New Zealand ?

:ok_hand: let me know how it goes

Working :slight_smile: I always wanted to live in New Zealand :slight_smile:

Is not everything using the TUYA API under the hood? At one point I had 4 different apps on my phone, because I had 4 different smart plug vendors... until I got the TUYA generic app, and surprise, that one app can see every smart device i have... regardless of the vendor?

OT but I spent over 5 months there in 1990 - had a fantastic time.

Got another issue - it all worked fine with an existing Cura GU10 bulb :slight_smile: I bought another bulb - Accio Mood GU10 - that works differently (different HSV values) but it works :slight_smile: I've also bought a couple of mains plugs (labelled ConnectBeat) - I can control them using the …

I find it useful to load the recommended app, then backtrack the resulting configuration, sometimes it is just a matter of firmware version is different that causes differences between the various API layers. I had a couple of smart plugs that seemed to not want to play nice, but after a firmware d…

First try pressing refresh channels. But I guess you have already done it. Yah, That happens sometime. Some manufactures customize the firmware and map to their own UIs instead of the generic UIs. At this point you are out of options. But I usually use a way around it by setting up an automation r…

Maybe the documentation needs to be changed from "any tuya, smartlife supported devices" to some/most ? :slight_smile: JFI I bought these switches from amazon.co.uk and they are labelled ConnectBeat. After I couldn't get them to work with this node, I tried using the OTA firmware update to flash …

Some of the vendors have been doing other weird things as well, to stop over-flashing. I had a smart wifi power strip fail... the mechanical relay died... if happens, right? And it was one of the devices I could not over-flash. Well I used that as in excuse to open the thing up, and there as no e…

Problems with node-red-contrib-smartlifeair

General

cymplecy 30 August 2020 06:48 20

The app says there's no firmware update available for these devices

Topic		Replies	Views
So the Node Red SmartLife Air Nodes appear to be abandoned or support is no longer done? General	14	562	21 August 2022
Node-red-contrib-smartlifeair - Devices found but no Input available Hardware	28	795	21 August 2022
Problem with node-red-contrib-smartlifeair General	2	282	11 January 2021
Node-red-contrib-tuya-smart-device doesn't work with newer Tuya devices General	1	234	12 March 2024
Problem with node-red-contrib-tuya-smart-device and new devices (Lamps) General	5	229	10 June 2024

Problems with node-red-contrib-smartlifeair

Related topics