is there more documentation on how to put address on node-omron-read like CIO Memory,... How should I set an internal boolean variable (I/O Channel) address on FINS read node?

[image] question: Have you setup the routing table (i.e. network 1 is definitely the ETN/EIP card?) question: what are the 2 node number dials set to on ETN/EIP card? [image] Try... DNA: 1 DA1: 0 DA2: 0 SNA: 1 SA1: last_octet_of_PC_IP SA2: 0 and try... DNA: 0 DA1: decimal-value-of-node…

Hi i have just poublised a new node node-red-contrib-omron-fins It is not on NPM for now but you can install manually from a command line. If you would like to test it, then you can install as follows... CD to your actual .node-red directory then npm install Steve-Mcl/node-red-contrib-omron-fin…

Thanks alot. I will test it as soon as possible.

I say its new - its newly published (been using privately for around 1 year) so its fairly stable. Probably could do with some user interface improvements but should work as is.

Can someone share an example how to use this node? When I read from the PLC it gives an error "Write not possible, cannot change"

Share your flow and a screenshot please. The node definitely works (I wrote it and use it in a production environment). Please also state the following... mode of plc (run / monitor) plc model PLC settings including fins node number, fins network number, fins port, the dial settings on the from o…

My PLC is an CJ1M-CPU12 Ip address is 192.168.2.16 - local network = 1 port 9600, node number 16 [{"id":"c5644fc4.0a8e2","type":"FINS Read","z":"82d25bf8.e54bc8","name":"","connection":"d3ed8148.030af","address":"D100","addressType":"str","count":"1","countType":"num","sign":"unsigned","x":400,"y…

@jaccoit would be nice if you could feedback if this worked (or not) and described what you did for future users.

Will do.... Still not working, I tried both [image] [image]

[image] jacco: This is correct? Yes. [image] jacco: Still not working, I tried both What is the subnet mask on PLC and PC? Can you screenshot CX Programmer -> IO Table -> ETN properties (IP TAB and FINS UDP tab)

Node-RED

Node-RED Forum

Read data memory node-omron-read

Industrial

Steve-Mcl 6 June 2020 18:12 14

Would you be kind enough to post a screen shot of your settings and your PLC setup to assist future readers?

Topic		Replies	Views
Reading Omron NX1P2 Data memory General	9	184	10 January 2024
Read Variables OMRON NJ101 or NJ301 Industrial	4	1128	23 September 2020
OMRON NX102 FINS Communication Issues Industrial	11	562	30 December 2024
Read Omron PLC using node-red-contrib-omron-fins Share Your Projects	0	702	3 January 2022
OMRON-PLC read and write Industrial	11	1856	4 August 2022

Copyright OpenJS Foundation and Node-RED contributors. All rights reserved. The OpenJS Foundation has registered trademarks and uses trademarks. For a list of trademarks of the OpenJS Foundation, please see our Trademark Policy and Trademark List. Trademarks and logos not indicated on the list of OpenJS Foundation trademarks are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

Read data memory node-omron-read

Related topics