Hi folks, I had hoped to have the node-red-contrib-google-smarthome up and running during my holidays. But in about 10 minutes I'm off to bed, and then my holidays are over and out. So mission failed :roll_eyes: In a previous discussion I succeeded in making port 3001 public available. I had ho…

Have you tried using Google assistant instead of the simulator, as the error message suggests. I'm away from home until Saturday evening, but when I get back, we can compare setups/tests/results if that helps.

BTW I have activated the logging in the config node. But I only get logs (via node-red-log) for the https://<my_wan_ip>:3001/check, but no extra log lines when I do the test in the simulator: [image] So not sure if the simulator has send anything to my service that is listening to port 3001 ...

[image] Paul-Reed: Have you tried using Google assistant instead of the simulator Thanks!!! Will try that tonight. That is indeed a good end-to-end test. But if you (or anybody else) has ideas to do intermediate tests, that would be nice: e.g. check my token or whatever... That would allo…

Paul, It seems that there is Google Cloud Logging, where the action logs are stored. Those logs can be viewed via the Google Cloud Console , under the Log Explorer menu item. After specifying the correct time window, I can see the logs of that moment: [image] A quick view shows "SYNC: Request I…

[image] Paul-Reed: Have you tried using Google assistant instead of the simulator Paul, using the Google assistant app it immediately worked :champagne: :clinking_glasses: Thanks a LOT for helping me!! I was so focussed on the technical part, that I didn't read the info text well ... What…

[image] BartButenaers: Hey Google, put my christmas tree on Did I miss some months? :smiley:

[image] hotNipi: Did I miss some months It's probably one of Bart's unfinished projects from Christmas 2018 :laughing::laughing:

I had added a christmas tree node at the time being, but at that moment I couldn't get the google-smarthome running. So my main target was to control that node (kerstboom=christmas tree): [image] Note that the output of this node is not connected to anything, because I have no physical christmas …

[image] Paul-Reed: Christmas 2018 Nearly correct. It was 2019 to be correct :sunglasses:

You could always create a Christmas tree out of ui-led nodes….

Node-RED

Node-RED Forum

Troubleshooting problems with node-red-contrib-google-smarthome

General

BartButenaers 3 September 2021 21:25 12

Don't forget my world famous SVG christmas tree...

Topic		Replies	Views
Completely stuck with node-red-contrib-google-smarthome General	15	1549	28 December 2021
Need help about google action General	2	412	15 April 2019
Nora Google Assistant General	2	497	24 December 2020
Google Home in Nodered General	9	926	19 March 2021
How to send text command from N-R to Google Home, assistant? General	7	328	4 February 2023

Copyright OpenJS Foundation and Node-RED contributors. All rights reserved. The OpenJS Foundation has registered trademarks and uses trademarks. For a list of trademarks of the OpenJS Foundation, please see our Trademark Policy and Trademark List. Trademarks and logos not indicated on the list of OpenJS Foundation trademarks are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

Troubleshooting problems with node-red-contrib-google-smarthome

Related topics